Bristan MT503CP Installatie-instructies en gebruikershandleiding - Pagina 10
Blader online of download pdf Installatie-instructies en gebruikershandleiding voor {categorie_naam} Bristan MT503CP. Bristan MT503CP 12 pagina's. Temperature stabilised thermostatic mixing valve
Pagina afdrukken
Maintenance
Temperature Adjustment
This valve is pre-set to a maximum
outlet temperature of 43°C.
It can be adjusted to have a maximum
temperature between 30°C - 55°C
IMPORTANT: To comply with the
TMV scheme, this valve cannot have a
maximum outlet temperature of 44°C.
If set higher, it will no longer comply
with the TMV scheme.
Please see the TMV manual supplied
with this valve for more details.
To adjust the temperature, follow
the steps below:
1. Turn on the valve and set to the
maximum temperature.
2. Remove the anti-tamper cover (1)
from the body (6). Using a suitable
hex key, insert through the head
assembly (3) and locate into the
groove of the adjusting screw (2).
3. Turn the adjusting screw (2) clockwise
for a cooler temperature, anti-
clockwise for a hotter temperature.
4. Wait for a few minutes after adjusting
for the temperature to stabilise. Use
a thermometer to measure the outlet
temperature. Repeat step 3 until you
have reached the desired result.
5. Replace the anti-tamper cover (1).
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
10
5
Head Assembly Parts
Part
Description
No.
2
Adjusting Screw
3
Head Assembly
4
BS010 O-Ring 90 Shore
5
BS029 O-Ring
4
3
2
Qty
1
1
1
1