Decatur Electronics Scout 2 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Decatur Electronics Scout 2. Decatur Electronics Scout 2 19 pagina's.

If you lock a speed while in Fast mode, the locked speed replaces the Fast speed.

Changing the radar settings

By using the menu feature, you can review and change many of the radar's settings. The radar will remember the

settings you last set when it is turned off and will power up with them.

Menus

The most commonly adjusted settings, Direction, Range and Volume are presented graphically. All other settings are

found in a secondary menu represented by the gear icon.

To change a setting, repeatedly press the MENU button until the icon representing the setting you

want to change appears. Then press the trigger switch to advance through the selections for that

setting. When you have made your selection, your new settings will be in effect immediately. If

neither MENU or the trigger switch is pressed after 2 seconds, the radar will return to normal

operating mode. You may also exit the menu setting by selecting the Exit icon.

Direction

The direction icon lets you select the direction of the target vehicle you want to display. An

up/down arrow indicates that you are monitoring vehicles moving both toward and away

from the radar.

Range

The range icon lets you control the maximum target-acquisition range in 5 steps. The

number of wavelets in the icon change based on the range selected. 1 is the lowest, 5 is

maximum. You will normally want to start with the maximum range and decrease it until you

attain the desired performance level.

Volume

The Volume icon controls the volume level of the Doppler tone. The volume level settings are

from 1 to 5. The operator cannot mute audio.