Green BM200 Series Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Green BM200 Series. Green BM200 Series 19 pagina's. Battery tester charger discharge maintainer

Pagina afdrukken

Green BM200 Series Gebruikershandleiding

Note: Following examples are all based on BM200-05 @ 3.2V100Ah LiFePO4 battery.

3.Set Battery Parameter：

3.1 select [1. Set battery param]

[Battery type]: Select of one from LiFePO4, Li-Ion, Pb-Acid, NIMH, NICD,

[Battery voltage]: Select battery nominal voltage from 2.0V ~ 28.8V, marked on battery label.

[Battery capacity]: Input the Ah value of battery capacity, which is marked on battery label.

[Charge voltage]: Charge voltage limit during charging process, marked on battery label.

[Charge current]: Set a constant current for charging process, recommend is 0.1C~0.5C.

[Battery in-resist]: Set the battery internal resistance, which is listed on battery datasheet.

[Dischar current]: Set a constant current for discharge process, recommend is 0.1C~0.5C.

[Dischar cut-off]: Set cut-off voltage for discharge process. Recommend is 0.8*rating voltage.

SHENZHEN GREEN DIGITAL POWER TECH CO., LTD

BM200 can be used for many types batteries. To get the accuracy test

results and charge safety, at first you should set the connected battery

parameters. If the battery connected is the same as last time, please

refer to Clause 3.2; Otherwise, please execute the following

(When the background of this item is highlighted, it means

selected, the same below), press <Enter> Key，screen will be:

Battery type

Battery voltage :

Battery capacity : 100 Ah

Charge voltage :

Charge current :

Battery in-resist :

Dischar current :

Dischar cut-off :

Save

This step can be skipped, BM200 will auto set a good default data.

This data is only used for evaluate battery SOH. If you have no data,

this step can be skipped, BM200 will auto set a genaral default data.

This step can be skipped, BM200 will auto set a good default data.

LiFePO4

3.2

3.65 V

20.0 A

mΩ

20.0 A

2.60 V

Return