Gamma PROGRESSION 600ES-LED Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gamma PROGRESSION 600ES-LED. Gamma PROGRESSION 600ES-LED 17 pagina's.

mounting system when the handle is grasped and attempts are made to move it. Should any

supports lose contact with the frame while stringing, they should be re-tightened.

MOUNTING THE FRAME

Adjusting the Frame Support Posts

Place the racquet frame over the center

posts and onto the frame support. Loosen the

lever lock bolt on one support post. Slide the

post outward until the center support of the

racquet support slide is positioned near the

inside surface of the racquet frame. Securely

tighten the lever lock bolt.

Adjust the opposite post using the same

procedure.

Caution: To avoid racquet damage, the cen-

ter posts should not contact the racquet prior

to fixing the support posts.

Adjusting the Frame Shoulder Supports

Being sure the shoulder supports are free to

swivel in their mountings, simultaneously

rotate the shoulder support adjustment knobs

clockwise until both shoulder supports gently

and squarely contact the frame.

Securing the Frame

Lock the shoulder supports in position by

turning the knob at the base clockwise.

Repeat the adjustment procedure for the

remaining support post.

Re-tighten all of the frame supports in the

same order as before.

Do not overtighten any of the supports as

racquet damage may occur.

The supports should be tightened to the point

where the racquet frame will not move in the