Gamma Progression Els Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gamma Progression Els. Gamma Progression Els 20 pagina's.
Ook voor Gamma Progression Els: Gebruikershandleiding (20 pagina's), Gebruikershandleiding (19 pagina's)

Pagina afdrukken

Gamma Progression Els Gebruikershandleiding

STRINGING THE FRAME

Aramid fiber and metallic strings will generally string up tighter on the machine compared

to synthetic or natural gut strings. Therefore, when stringing with Aramid (Kevlar, Technora)

hybrid strings or metallic strings, we recommend setting tension 4-5 lbs. lower than you would

normally use for synthetic or natural gut strings.

CAUTION:

NEVER TENSION A STRING WITH YOUR FINGERS BETWEEN

THE STRING AND THE UPPER GRIPPER JAW AS SERIOUS INJURY COULD

RESULT IF YOUR FINGER IS CAUGHT BETWEEN THE STRING AND THE

UPPER JAW DURING TENSIONING.

SWITCH OR ANY BUTTON IN CASE OF EMERGENCY.

Setting the String Tension

String tensions may be entered and stored into

one of nine memory storage settings (See sec-

tion on Control panel Functions and features) by

using the tension index buttons. While tension

setting is entered, the value displayed will be

temporary until the "Enter" button is pressed to

store it in one of the nine permanent memory

settings.

Applying Tension

To apply tension, wrap the string clockwise

around the gripper drum and position the

string between the gripper jaws.

The string must pass over the upper gripper

jaw before being placed between the gripper

jaws, as the tension on the string provides

the clamping force to the gripper jaws.

Before applying tension, gently pull the string

until all slack is removed.

PUSH GRIPPER REVERSING

To tension a string, push the tension switch

or the foot pedal. The string gripper will ro-

tate and slowly apply tension to the string.

When the set tension has been attained, the

gripper will stop rotating and the display will

flash. As the tensioned string stretches, the

gripper may rotate intermittently, maintaining

the set tension.

To release the string after clamping, push the

tension switch or foot pedal. If the string grip-

per does not release the string, depress and

hold the return button to release the string.