Gamma X-6 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gamma X-6. Gamma X-6 16 pagina's.
Ook voor Gamma X-6: Gebruikershandleiding (15 pagina's)

Pagina afdrukken

MOUNTING THE FRAME

Adjusting the Frame Support Posts

Loosen the lock bolts of the frame support

posts and space them apart with the frame

support slides separated by the approximate

length of the racquet head. Although it is not

required, it is good practice to center the sup-

port posts on the turntable. Lock one of the

posts in position by tightening the lock bolt and

position the other post until the frame support

slide is positioned near the inside surface of

the racquet frame. Securely tighten the lock

bolt of the second support post.

Caution: To avoid racquet damage, the

center posts should not contact the racquet prior to locking down the support posts.

Tightening the Frame Supports

Tighten the Frame Support Slides by turn-

ing the adjustment knob clockwise until

snug against the racquet frame and slight

resistance is felt.

Caution: Overtightening the Center Sup-

ports will stretch the head of the racquet and

could cause racquet damage.

Frame Shoulder Support

Arm

Adjustment

Being sure the shoulder supports are free

to swivel in their mountings, simultaneously

rotate the shoulder support adjustment knobs

clockwise until both shoulder supports gently

and squarely contact the frame.