Green Air Designs Su-27 Flanker Gebruiksaanwijzing - Pagina 16

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Green Air Designs Su-27 Flanker. Green Air Designs Su-27 Flanker 17 pagina's.

Step 7 – Setup and Painting

Note: Vtail/Elevon mixer or computer Tx required

Throws

3" / 75mm Top to bottom for aileron movement.

2" / 50mm Top to bottom for elevator movement.

With this setup the plane is agile and responsive. You may want to turn down

the aileron movement for first flight, depending on your ability.

Centre of Gravity

35mm back from where the leading edge of the wing meets the straight part at

the root.

Finishing

We usually use light weight filler (polyfiller, "onefill" or spackle) watered down

with water and slopped on......left to dry then sanded to fill all dents and

sanding marks.

Once to the right smoothness, give the surface 2 coats of 50% watered down

PVA and a light sand then paint!

We recommend water based acrylics and some enamels.....but be careful as

some enamels have a high VOC and will eat the foam! We take no

responsibility for damage to planes through unsuitable paints used!

DO NOT USE CELLULOSE BASED PAINTS!!

We at Green Air Designs wish you many hours of fun with your new Su-27

Flanker.