Gamma Led Vision SPEKTRA FRESNEL 300W LED Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gamma Led Vision SPEKTRA FRESNEL 300W LED. Gamma Led Vision SPEKTRA FRESNEL 300W LED 10 pagina's. 300w single color led fresnel spotlight with manual zoom

Pagina afdrukken

SAFETY WARNING

1. Warning

﹡ Every person involved with the installation , operation and maintenance of this device has to be qualified .

﹡ User must follow the instructions of this manual

﹡ Unqualified person can not open the housing cover and operate the device , or the dealer will not accept liability for any

resulting defects or problems.

﹡ The device against rain and moisture

2. Waring notes :

﹡ Power supply : AC 100V-240V , 50/60Hz

﹡ Make sure the power switch is off , the power plug , outlet and the earth connection is in well condition before

connecting the device with the mains.

﹡ Please use qualified power plug and the outlet. Never connect the power cord of this device with other electrical

equipment.

﹡ During move and installation , make sure the device not crashed with metal parts and other tough materials.

﹡ Always disconnect from the mains, when the device is on the installation and dismantled

﹡ The minimum distance between light-output and the illuminated surface must be more than 50cm

﹡ The device must only be installed on a non-flammable surface . In order to safeguard sufficient ventilation , leave 50cm

of free space around the device . Please note that heat-sensitive objects may be deformed or damaged by the emitted

heat .

﹡ During the operation the housing becomes very hot ! Do not operate the device for 15 minutes after switching off .

﹡ The maximum ambient temperature Ta = 45℃ must never be exceeded , The maximum housing temperature Tb = 80℃

must never be exceeded .

﹡ For indoor use

﹡ Replace any visible cracked protective shield , filters and lens .

﹡ The protective shiel, filters and lens will require weekly cleaning as smoke "Cfluid tends to building up residues ,

reducing the light "Coutput very quickly.