Gamma Led Vision TX4 Spot Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gamma Led Vision TX4 Spot. Gamma Led Vision TX4 Spot 18 pagina's. 150w spot moving head
Pagina afdrukkenBefore mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 items the device's weight.
Fixture installation must always be secured with a secondary safety attachment, such as an
appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture.
From a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is
kept at least 0.5m (1.5ft) away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent accidental
damage and/or injury in the event the clamp fails.
Overhead mounting requires extensive experience, including amongst
Mounting points:
others calculating working load limits, a fine knowledge of the installation material being
used, and periodic safety inspection of all installation material and the fixture. If you lack
these qualifications, do not attempt the installation yourself. Improper installation can
result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the main
power cord to the appropriate wall outlet.
The TX4-150 provides a unique mounting bracket assembly that
Clamp Mounting:
integrates the bottom of the base, and the safety cable rigging point in one unit (see the
illustration below). When mounting this fixture to truss be sure to secure an appropriately
rated clamp to the included omega bracket using a M10 screw fitted through the center
hole of the "omega bracket". As an added safety measure be sure to attached at least
one properly rated safety cable to the fixture using on of the safety cable rigging point
integrated in the base assembly.
TX4 Spot – GAMMA LED Vision
Page 4 of 18