Major Manufacturing HIT-66-200 Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Major Manufacturing HIT-66-200. Major Manufacturing HIT-66-200 8 pagina's. Lock mortiser

Pagina afdrukken

Attach the mortiser attachment to the HIT

-66 clamp set using the supplied

1/4-20 x 1-1/2" socket screws. The mor-

tiser is held to the HIT-66 clamp system

with two screws on top and two on the

bottom. Leave all screws loose at this

time.

NOTE: The HIT-66 clamps

shown are not part of the

HIT-66-200 mortiser set and

must be purchased as a

separate item.

Once all screws have been installed they

can be tightened.

Slide the mortise bit into the unit and

slide the stop collar on the end of the

shaft.

PAGE 3