Major Manufacturing HIT-66-266 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Major Manufacturing HIT-66-266. Major Manufacturing HIT-66-266 10 pagina's. Template for saflok mt-mko & daj mortise lock

Pagina afdrukken
Use a straight edge and
pencil and connect the four
holes that identify the card
reader cut out. Draw the lines
using the outside diameter of
the holes as shown.
On the inside of the door draw
a line from the outside of the
bottom 3/8" hole to the
outside of the 2-1/8" hole as
shown. See arrow.
Draw a second line from the
opposite side of the 3/8" hole
to the center of the 2-1/8" hole
as shown. This notch will be
for the wire clearance.
Copyright 2014—Major Manufacturing
PAGE 7