KitchenAid 8285364 Handleiding voor installatie-instructies - Pagina 3

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} KitchenAid 8285364. KitchenAid 8285364 17 pagina's. 30" (76.2cm) and 36" (91.4 cm) electric built-in ceramic downdraft cooktop

Pagina afdrukken

Product Dimensions

21-13/16"

(54.4 cm)

depth

Clearance Dimensions

30" (76.2 cm) min - 30" (76.2 cm) cooktop

36" (91.4 cm) min - 36" (91.4 cm) cooktop

when higher than 18" (45.7 cm)

See Note ** for

minimum clearances

Minimum distance

to nearest combustible

vertical surface

extending 18" (45.7 cm)

above cooktop

1" (25.4 mm)

Side clearance — 6" (15.2 cm) minimum clearance between side

of cooktop and side wall is recommended for maximum

ventilation performance.

Rear clearance — 3/4" (19.1 mm) clearance between rear edge of

cooktop and rear wall is recommended.

Motor/blower clearance — 2" (51 mm) minimum clearance

between motor and cabinet is required for proper cooling.

6" (15.2 cm) clearance is recommended for servicing access.

Note: 24" (61 cm) minimum when bottom of wood or metal cabinet is

protected by not less than 1/4" (6.4 mm) flame retardant millboard covered

with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel,

0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top of the cooking platform

and bottom of unprotected wood or sheet metal.

31-1/2" (80 cm) - 30" (76.2 cm) cooktop

37-1/2" (95.3 cm) - 36" (91.4 cm) cooktop

width

(74.6 mm)

burner box

14-5/8" (37.1 cm)

blower housing

3-ft. (91.4 cm) long

depth

power supply cable

factory installed.

21" (53.3 cm)

Do Not seal

opening depth

cooktop to countertop.

29-1/2" (74.9 cm) - 30" (76.2 cm) cooktop

35-1/2" (90.2 cm) - 36" (91.4 cm) cooktop

cutout width

Cutout Dimensions

29-1/2" (74.9 cm) - 30" (76.2 cm) cooktop

35-1/2" (90.2 cm) - 36" (91.4 cm) cooktop

2-15/16"

depth

Select required duct cutout

(see Page 4 for exhaust duct

cutout location).

countertop

Install rear

wall junction

box in shaded

area. Darker

shaded area is

preferred.

floor

Minimum base cabinet dimensions —

30" (76.2 cm) base cabinet width

24" (61 cm) base cabinet depth

25" (63.5 cm) countertop depth

Countertop opening dimensions that are shown must

be used. Given dimensions are minimum clearances and

provide required 0" (0 cm) clearance.

New installations — Follow minimum dimensions given.

Replacement installation — Be sure that front edge of

cooktop is at least 1-1/2" (38.1 mm) back from front

edge of countertop.

If cabinet has drawers, drawers will need to be

removed and drawer fronts installed on front of cabinet.

Cutout preparation:

Decorative laminate —

Chamfer all exposed edges to

prevent chipping laminate.

Cut radius corners and file to

smooth edges and to prevent

cracking.

cutout width

Countertop must be

supported within

3" (7.6 cm) of cutout.

5" (12.7 cm)

17"

(43.2 cm)

11" (27.9 cm)

8" (20.3 cm)

21" (53.3 cm)

cutout depth

2" (5.1 cm) minimum

space to front edge of

countertop