Major Manufacturing HIT-40AR4 Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Major Manufacturing HIT-40AR4. Major Manufacturing HIT-40AR4 10 pagina's. Lip strike template

Pagina afdrukken

You are now ready to route the new

opening.

Place the router bit in the existing cut out

and with firm control of the router follow the

HIT-40 template and feed the router slowly

in a CLOCKWISE DIRECTION.

Route in a line up the front portion of the

jamb staying just inside the frame to

complete the opening. ( If you route out the

front of the frame at this point, there will be a

large gap in front of the strike that will be

visible. ) This area will be routed out after

the bit has been adjusted to a new cutting

depth.

IMPORTANT!! DO NOT ROUTE

THROUGH THE FRONT EDGE OF THE

JAMB. MAKE THE VERTICLE CUT

ABOUT 3/8" INSIDE THE FRONT EDGE.

Make sure the base of the router is held flat

on the routing template. When completed

with the cut, turn the router off and wait for

the bit to come to a complete stop before

removing it from the template. Failure to

do so may cause damage to the door,

your HIT-40 template, or injury to your-

self.

Page 7