Centsys G-Switch-22 Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Centsys G-Switch-22. Centsys G-Switch-22 2 pagina's. Gsm module monitoring and control

Pagina afdrukken

12. Setting up the G-SWITCH-22 commands

Multi-user capability (300 phone numbers)

It is important to note that the memory of the G-SWITCH-22 GSM

module is limited to 300 phone numbers. In other words a maximum of

300 phone numbers can be registered on the system at any one time.

Each phone number can be configured uniquely with respect to inputs

and outputs, as well as activation and notification messages. Each

phone number can be assigned a limited number of uses for each

output.

When the memory limit is reached, trying to add new phone numbers

will not overwrite or affect the existing numbers stored into the

system. It will just not be possible to add the additional numbers.

13. In a hurry?

To simply add a phone number to the module to trigger Output 1,

default pulse time with a missed call, send the following SMS to the

module: 'p.xxxx.ap.yyyyyyyyyy, where xxxx is the system password

(default is 1234 ), and yyyyyyyyyy is the phone number you wish to

add'.

For your own security, it is recommended that the default password be changed

and that SIM PIN checking be enabled (see 'CO. Configuring the module')

Ensure that a record of your system password is kept in a safe place.

Record system password here

Ensure that a record of the new SIM PIN number is kept in a safe place.

Record new SIM PIN here

14. Command structure

Programming commands are sent to the module using a standard

text message (SMS)

The command structure must always take the following form:

p.xxxx.command1.parameter1.parameter2 command2.

parameter1.parameter2, etc.

All commands must start with 'p.xxxx. Where xxxx is a user

defined four digit password. The default password is 1234.

For security purposes, this should be changed on commissioning.

Each command and parameter must be separated by a

period (.)

Commands can be concatenated, and must be separated

by a space ( )

The maximum message length is limited to 160 characters

Commands are not case sensitive

15. Command overview

Description

Parameters

(Password)

four digit password

System password

Phone number(s) (up to 16 digits each).

Output to be activated by a missed call or

sms (OU1/OU2)

Input to be monitored (IN1/IN2)

(Add phone)

Sub Parameters

Add a phone

User Limit UL (1 – 65536 activations)

number to the

system

Output text string (1 - 50 characters)

Input text string (1 - 50 characters)

A user limit restricts the number of times a missed call

will activate the unit. Once the user limit is reached, the

phone number will automatically be deleted from the

system

(Delete phone)

Phone number (up to 16 digits)

Delete a phone

Phone number (up to 16 digits)

OU1

Activates Output 1

DOU1

Deletes Output 1

OU2

Activates Output 2

DOU2

Deletes Output 2

In1

Activates Input 1

(Edit phone)

DIN1

Deletes Input 1

Edit phone

IN2

Activates Input 2

DIN2

Deletes Input 2

DIN1S

Deletes Input 1 string

DIN2S

Deletes Input 2 string

DOU1S

Deletes Output 1 string

DOU2S

Deletes Output 2 string

Load airtime (L)

(Airtime)

Query airtime (Q)

Loads or queries

Sub-Parameters

Airtime voucher number

(Query phone)

Query phone

Phone number (up to 16 digits)

settings

OU1PU

Sets Output 1 as pulsed

OU1LA

Sets Output 1 as latched

(Configuration)

OU1PT

Sets Output 1 pulse time in

Configure inputs,

milliseconds

outputs and

OU2PU

Sets Output 2 as pulsed

system

OU2LA

Sets Output 2 as latched

settings

OU2PT

Sets Output 2 pulse time in

milliseconds

Requests Signal strength

Change SIM card PIN number

Enable SIM card PIN checking

Disable SIM card PIN checking

Set SIM PIN in memory only

Queries the firmware version

Query the module settings

New system password

Backup EEPROM

Restore EEPROM

Input/Output mappings

Reset.all

Resets all settings on the module

Reset.usr

Resets User Data on the module

Reset.con

Resets Config. data on the module

Sub-Parameters

Pulse time

In milliseconds

New PIN

four digits

New password four digits

IO Mapping

P. Setting a new system password

Command

Description

p.xxxx.CO.NP.

yyyy is the new password.

yyyy

Reset to factory default settings

In the event that you forget the system password you will need to

reset the module to the factory default settings. To do this, please

follow the steps below:

Power down the module.

Bridge the following terminals: IN1, IN2 and GND.

Short out the defaulting pads by touching across them with the tip

of a screwdriver.

Power up the module.

Remove the bridges to the terminals as mentioned in point 2 and 3

above, as well as the defaulting pads.

The module will now be reset to the factory default settings.

All of the information on the module will be erased

AP. Adding a phone

This command allows new phone numbers to be added to the system.

When adding a new phone, it is possible to specify which outputs are to

be activated by a missed call from the phone, and which inputs will

cause a message to be sent to the phone. The number of times the

phone can be used to activate the system can also be specified.

Description

Parameters

Phone number(s) (up to 16 digits each)

Output to be activated by a missed call or sms

(OU1/OU2)

(Add phone)

Input to be monitored (IN1/IN2)

Add a phone

number to the

Sub-Parameters

system

User Limit UL (1 – 65536 activations)

Output text string (1-50 characters)

Input text string (1-50 characters)

Examples

(Commands have been highlighted for clarity)

Command

Description

Adds phone number 0841234567 to the system and,

since no parameters are specified, by default

p.xxxx.AP.08412

assigns Output 1 to be activated by a missed call

34567

from this number. This allows easy addition of new

phones to a basic system.

Adds phone number 0841234567 to the system,

p.xxxx.AP.08412

and assigns Output 2 to be activated by a missed

34567.OU2

call from this number.

Adds phone number 0841234567 to the system,

and assigns Output 2 to be activated by sending an

SMS with the message specified in "Ou2 Text" .

"Ou2 Text" is not case sensitive, and MUST

p.xxxx.AP.08412

begin and end with double quotation marks

34567.OU2.

("). The quotation marks (" ")are only

"Ou2 Text"

required when programming – They must

not be included when sending the text

message to activate the output.

Adds phone number 0841234567 to the system,

and assigns Output 1 to be activated sending an

p.xxxx.AP.08456

SMS with the message specified in "Ou1 Text", with

32347.OU1.

a user limit of 20 uses. After 20 SMSs (activations)

UL20."Ou1 text"

this number will automatically be deleted from the

system.

Adds phone number 0841234567 to the system,

p.xxxx.AP.08412

and assigns both Output 1 and Output 2 to be

34567.OU1.OU2

activated by a missed call from this number.

Adds phone numbers 0841234567 and 0837654321

to the system, and assigns Output 1 to be activated

p.xxxx.AP.08412

by a missed call from EITHER of these numbers. The

34567.08376543

number of phone numbers that can be added in one

21.OU1

command is limited only by the maximum allowed

message length (160 characters).

Adds phone number 0841234567 to the system,

and assigns Output 1 to be activated by a missed

p.xxxx.AP.08412

call from this number, with a limit of five uses.

34567.OU1.UL5

After five missed calls (activations), this number will

automatically be deleted from the system.

Adds phone number 0841234567 to the system,

and assigns both Output 1 and Output 2 to be

p.xxxx.AP.08412

activated by a missed call from this number.

34567.OU1.

Output 1 has a limit of 25 uses. After 25 missed

UL25.OU2

calls (activations), Output 1 will no longer be

activated by a missed call. However, Output 2 will

continue to function indefinitely.

Adds phone number 0841234567 to the system,

and assigns both Output 1 and Output 2 to be

activated by a missed call from this number. Output

p.xxxx.AP.08412

1 has a limit of 25 uses, and Output 2 has a limit of

34567.OU1.

100 uses. After 25 missed calls (activations),

UL25.OU2.

Output 1 will no longer be activated by a missed

UL100

call. However, Output 2 will continue to function for

a further 75 calls. Thereafter, this number will

automatically be deleted from the system.

Adds phone number 0841234567 to the system,

and assigns Input 1 to be monitored. In the event

that Input 1 is triggered, the message specified in

"In1 Text" will be sent to this number. "In1 Text"

is case conscious – the message sent will exactly

reflect the "In1 Text" specified.

p.xxxx.AP.08412

34567.IN1.

In1 Text must begin and end with double

"In1 Text"

quotation marks ("). The quotation marks

(" ") are only required when programming

– They will not be included in the text

message sent when the input is activated.

A missed call from this number will not

trigger an output.

Adds phone number 0841234567 to the system,

p.xxxx.AP.08412

and sets a missed call from this number to trigger

34567.OU1.IN2.

Output 1. It also assigns Input 2 to be monitored.

"In2 Text"

In the event that Input 2 is triggered, the message

specified in "In2 Text" will be sent to this number.

DP. Deleting a phone

This command allows one or more numbers to be deleted

from the system

Description

Parameters

(Delete phone)

Phone number(s) (up to 16 digits)

from the system

Examples

(Commands have been highlighted for clarity)

Command

Description

Deletes phone number 0841234567 from the

p.xxxx.DP.08412

34567

system

p.xxxx.DP.08412

Deletes phone numbers 0841234567, 0837654321

34567.08376543

and 0827766554 from the system

21.0827766554

EP. Editing a phone

This command allows the functionality of a phone to be edited.

It is useful when a number has been added with the wrong

functionality, or when circumstances have changed

Description

Parameters

Phone number (up to 14 digits)

OU1

Activates Output 1

DOU1

Deletes Output 1

OU2

Activates Output 2

DOU2

Deletes Output 2

IN1

Activates Input 1

DIN1

Deletes Input 1

IN2

Activates Input 2

(Edit phone)

DIN2

Deletes Input 2

Edit phone

DIN1S

Deletes Input 1 string

DIN2S

Deletes Input 2 string

DOU1S

Deletes Output 1 string

DOU2S

Deletes Output 2 string

Sub-Parameters

Output text string (1-50 characters)

Input text string (1-50 characters)

QP. Querying a phone

This command allows the functionality of a phone in the system

to be queried. Information for that phone, including what

outputs and inputs are active, text strings and limited use

counters will be sent in a text message to the querying phone

Description

Parameters

(Query phone)

Phone number (up to 16 digits)

Query phone

settings

Examples

(Commands have been highlighted for clarity)

Command

Query

p.xxxx.QP.08412

Queries phone number 0841234567. Phone

34567

settings are sent via SMS to the querying device.

AT. Airtime

This command allows an airtime voucher to be loaded, or

remaining airtime to be queried

Description

Parameters

Load airtime (L)

(Airtime)

Query airtime (Q)

Loads or queries

Sub-Parameters

airtime

Airtime voucher number

Examples

(Commands have been highlighted for clarity)

Command

Description

p.xxxx.AT.L.1234

Loads airtime voucher number 1234567890 onto

567890

the SIM.

Airtime remaining on the SIM is sent via SMS to

p.xxxx.AT.Q

the querying device.

CO. Configuring the module

This command allows the functionality of the system to be

configured. Outputs can be set up, states of input/outputs

checked, PINs and passwords managed, etc.

Description

Parameters

OU1PU

Sets Output 1 as pulsed

OU1LA

Sets Output 1 as latched

OU1PT

Sets Output 1 pulse time in ms

OU2PU

Sets Output 2 as pulsed

OU2LA

Sets Output 2 as latched

OU2PT

Sets Output 2 pulse time in

milliseconds

Requests Signal strength

Change SIM card PIN number

Enable SIM card PIN checking

Disable SIM card PIN checking

Set SIM PIN in memory only

(Configuration)

Queries the firmware version

Configure inputs,

Query the module settings

outputs and

New system password

system settings

Backup EEPROM

Restore EEPROM

Input/Output mappings

Reset.all

Resets all settings on the module

Reset.usr

Resets User Data on the module

Reset.con

Resets Config. Data on the

module

Sub-Parameters

Pulse time (milliseconds) 1s = 1000ms

New PIN number (four digits)

New password (four digits)

IO Mapping

Examples

(Commands have been highlighted for clarity)

Command

Output configuration

p.xxxx.CO.OU1PU

Sets Output 1 as pulsed, and sets Output 1 pulse

.OU1PT.2000

time to 2 seconds (2000 milliseconds).

Sets Output 1 as latched, sets Output 2 as pulsed,

p.xxxx.CO.OU1LA

and sets Output 2 pulse time to 1.5 seconds (1500

.OU2PU.OU2PT.15

milliseconds).

Sends an SMS to the querying phone with a value

p.xxxx.CO.SS

of 10 (strongest) to 1 (weakest) for signal strength.

SIM card PIN number settings

Command

Description

Change the SIM card PIN number. yyyy is the NEW

p.xxxx.CO.CS.

PIN number. The old PIN number does not have to

yyyy

be entered.

p.xxxx.CO.EP

Enable checking of the SIM PIN number on startup.

p.xxxx.CO.DP

Disable checking of the SIM PIN number on startup.

Setting the new SIM PIN number in memory only

(Useful when a new SIM is going to be inserted in

p.xxxx.CO.SP.

the future. On startup, the module will

yyyy

automatically try this PIN if the old PIN does not

work). yyyy is the new PIN number. The old PIN

number does not have to be entered.

Query Firmware version

Command

Description

Sends an SMS to the querying phone with the

p.xxxx.CO.QF

module firmware version.

Query controller status/settings

Command

Description

Sends an SMS to the querying phone with the

following information:

Current state of the outputs

Current state of the inputs

p.xxxx.CO.QS

Output configuration (Pulsed/Latched)

Output pulse times

Input-Output mappings

IP address and port of host server

Backing up and restoring the memory

The following commands require an optional Memory Backup

Module (Product code PCA12201V1.0). See Section 6 for

location of Backup module port

Command

Description

Backup the entire module memory (EEPROM) onto

a CENTSYS Backup Memory Module.

This includes all user information and module

settings. The Memory Backup Module must be in

p.xxxx.CO.BE

place before the command is sent to the module.

After sending the command, a confirmation SMS

will be sent back indicating whether the backup

was successful or not.

Restore the entire module memory (EEPROM) from

a CENTSYS Backup Memory Module.

This includes all user information and module

settings. The Memory Backup Module must be in

place before the command is sent to the module.

p.xxxx.CO.RE

After sending the command, a confirmation SMS

will be sent back indicating whether the restore was

successful or not.

Mapping inputs to outputs

Allows activation and deactivation of input-output

mappings. If an input is mapped to an output, and

that input is activated, the mapped output will also

activate, responding according to its configuration

settings:

IN1.OU1 : Maps Input 1 to Output 1

IN1.OU2:

Maps Input 1 to Output 2

p.xxxx.CO.IO

IN2.OU1:

Maps Input 2 to Output 1

IN2.OU2:

Maps Input 2 to Output 2

DIN1.OU1: Deletes Input 1 to Output 1 mapping

DIN1.OU2: Deletes Input 1 to Output 2 mapping

DIN2.OU1: Deletes Input 2 to Output 1 mapping

DIN2.OU2: Deletes Input 2 to Output 2 mapping

Clearing memory

Command

Description

Reset the entire module. All user information is

p.xxxx.CO.reset.

deleted, and all module settings are restored to

all

factory default.

p.xxxx.CO.reset.

Delete all user information on the module.

usr

Module settings are not affected.

p.xxxx.CO.reset.

Reset all module settings to factory defaults.

con

User information is not affected.

Alternative SMS activation of outputs

Even though preconfigured SMS text may have been assigned

to outputs when adding a phone to the system, the outputs on

the module can also be explicitly activated by sending an SMS

to the module, from a valid phone (a valid phone is one for

which a number exists in the system, and for which outputs

have been assigned), with one of the commands below:

OU1.on; OU1.off; OU2.on or OU2.off

Examples

Command

Description

Activates Output 1. If OU1 is set as pulsed, the

output will activate for the configured pulse time

OU1.on

If OU1 is set as latched, it will turn on and

remain on.

Deactivates Output 2. If OU2 is set to pulsed, the

OU2.off

command will have no effect. If OU2 is set to

latched, and currently on, it will turn off.

Tips and tricks

You can use the text "me" instead of specifying your own number

when adding, deleting, editing or querying your phone i.e.

p.xxxx.AP.me

If you add a 'space' and then the text "ACK" to the end of any

command, you'll receive an SMS back confirming that the

command has been received by the module. For example,

p.xxxx.DP.0841234567 ACK

If you make a mistake during the programming via a cell phone,

you will receive an "error" sms to let you know

The module must have sufficient airtime credit to send the

SMS