IKEA 004.169.47 Handmatig - Pagina 14
Blader online of download pdf Handmatig voor {categorie_naam} IKEA 004.169.47. IKEA 004.169.47 32 pagina's.
Pagina afdrukken
ENGLISH
Setting function: Microwave Combi
1. Remove microwave bottom glass plate.
2. Turn the knob for the heating functions
to select the function
Caution! Do not let the oven
operate when there is no food in
it.
The display shows the default temperature.
3. Press
to start.
4. Press
again and again to change:
Duration, microwave power,
temperature. Turn the control knob to
set the value and press
Around 5 degrees before the set
temperature is reached the signal
sounds. When the set time ends the
signal sounds again and the oven stops.
Clock functions
Clock functions table
Clock function
To show or change the
time of day. You can
TIME OF DAY
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
DURATION
heating function is set.
To set when the oven
turns off. Use only when a
END
heating function is set.
Combination of DURA‐
TION and END function.
TIME DELAY
Use to set a countdown
time. This function has no
MINUTE MIND‐
effect on the operation of
ER
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
.
to confirm.
Application
5. Turn the knob for the heating functions
to the off position.
When you use this function with the time
set for more than 7 minutes, the
microwave power cannot be more than
600 W.
The oven can make noises
when using the function:
Microwave Combi. They are
normal for this function.
Heat-up indicator
When the oven function operates, the bars
in the display
appear one by one when
the temperature in the oven increases, and
disappear when it decreases.
Clock function
00:00
If you do not set any other
COUNT UP
clock function the COUNT
TIMER
UP TIMER automatically
monitor how long the
oven works.
The counting starts imme‐
diately when the oven
starts to heat.
The Count Up Timer can‐
not be used with the func‐
tions: DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows
flashes.
1. Turn the control knob to set the hours.
2. Press
to confirm and set the minutes.
The display shows
"00" flashes.
3. Turn the control knob to set the current
minutes.
14
Application
and "12:00". "12"
and the set hour.