Green Brook TXP400Y Installatie-instructies

Blader online of download pdf Installatie-instructies voor {categorie_naam} Green Brook TXP400Y. Green Brook TXP400Y 2 pagina's. Portable xenon floodlight 230v/400w, 110v/400w

Pagina afdrukken

FOR PORTABLE XENON FLOODLIGHT

IMPORTANT SAFETY INFORMATION

ELECTRICAL SAFETY

This worklight must be earthed. If it becomes necessary to

rewire the plug please follow these guidelines. Always secure

wires in plug terminals carefully. Make sure the cable is firmly

located in the cord grip. NEVER connect the green & yellow wire

to any terminal other than one marked with the earth symbol 'E'

or ' '.

Regularly inspect all electrical connections and wiring for

damage. Any faults should be immediately rectified before

further use of the worklight. Always have the wiring and

connections checked by a qualified electrician. In use, ensure all

wiring and extension cables are kept clear of any cutting tools,

sharp objects and any other potential hazards such as wet

floors, chemicals & solvents etc.

Note:

If your mains wiring differs in any way from Diagram A. Consult

a qualified electrician. Always replace the fuse with one of an

identical rating.

1. Slide the stand into the worklight bracket (G).

2. Align the holes in the bracket and the stand.

3. Insert and tighten angle adjustment control (D).

4. To alter the angle of the worklight, simply loosen the angle

adjustment control (D), pivot the worklight until the

desired angle is achieved and re-tighten control (D).

5. Check the worklight is secure and that the stand is stable and

has a firm footing.

6. Ensure cable is not catching on any sharp object and that the

mains plug connection is adequately protected against rain or

moisture.

7. Your worklight is now ready for use.

INSTALLATION INSTRUCTIONS

TXP400 - 230V/400W

TXP400Y - 110V/400W

Diagram A

Blue: Neutral to 'N' Terminal

Brown: Live to 'L' Terminal

Green & Yellow: Earth

ASSEMBLY AND USE

Terminal