Major tech MT350 Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Major tech MT350. Major tech MT350 8 pagina's. Loop impedance & psc tester

1. SAFETY INFORMATION

• Read the following safety information carefully before attempting to

operate or service the meter.

• To avoid damages to the instrument do not apply the signals which

exceed the maximum limits shown in the technical specifications tables.

• Do not use the meter or test leads if they look damaged. Use extreme

caution when working around bare conductors or bus bars.

• Accidental contact with the conductor could result in electric shock.

• Use the meter only as specified in this manual; otherwise, the protection

provided by the meter may be impaired.

• Read the operating instructions before use and follow all safety

Information.

Caution refer to this manual before using the meter.

Dangerous voltages.

Meter is protected throughout by double insulation or reinforced

insulation.

When servicing, use only specified replacement parts.

CE Comply with EN-61010-1

Link the test line

Check the wires state:

Before pushing the "test" button, certificate the 3 led status

P-E - led light

P-N - led light

P-N - reverse led not light

If indicating light's status is not like this, don't test and check the

wires again.

When the tester is linked to the power, LCD will update the voltage (P-E)

per second. If the voltage is unusual or not expected value, don't proceed

with the test!

The tester only used in AC230V +10% -15% (50Hz).