Major tech MT723 Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Major tech MT723. Major tech MT723 16 pagina's. Ac/dc trms clamp meter

7.9. Continuity Measurements

1. lnsert the black test lead into the negative COM terminal and the red

test lead into the V

2. Set the function switch to the Ω

3. Use the MODE button to select continuity " ". The display icons will

change when the MODE button is pressed.

4. Touch the test probe tips across the circuit or component under test.

5. lf the resistance is < 50 Ω , a tone will sound.

WARNING: Risk of Electrocution. Before use, always test the Voltage

Detector on a known live circuit to verify proper operation

1. Touch the probe tip to the live conductor or insert into the live side of

the electrical outlet.

2. lf AC voltage is present, the detector light will illuminate.

NOTE: The conductors in electrical cord sets are often twisted. For best

results, rub the probe tip along a length of the cord to assure placing

the tip in close proximity to the live conductor.

NOTE: The detector is designed with high sensitivity. Static electricity or

other sources of energy may randomly trip the sensor. This is normal

operation.

7.11. MODE/VFD (Variable Frequency Drive)

1. Press MODE/ VFD key to select the double measurement functions.

This key is active in V

test, diode test, continuity test, HZ%, and in Temp position to select

between °F or °C.

2. Press and hold the MODE/VFD key and turn the selector switch to turn

the system on, the auto power off function will be cancelled.

3. Press and hold the MODE/VFD key for 2 seconds to switch to VFD.

1. To freeze the LCD reading, press the Hold/Flashlight button. While

data hold is active,the HOLD icon appears on the LCD. Press the

button again to return to normal operation.

2. The LCD is equipped with backlighting for easier viewing, especially in

dimly lit areas.

3. Press the Hold/Flashlight button to turn the Flashlight on. Press again

to turn the Flashlight off.

CAP TEMP Hz% Ω positive terminal.

CAP Ω

position to select among resistance

position.