Centurion D5-EVO REPAIR Handleiding voor installatie-instructies - Pagina 9
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Centurion D5-EVO REPAIR. Centurion D5-EVO REPAIR 14 pagina's. Sliding gate operator
Ook voor Centurion D5-EVO REPAIR: Configuratiehandleiding (13 pagina's), Handleiding voor programmering (4 pagina's)
Pagina afdrukken
Foundation plate installation
The foundation plate can either be set into a concrete foundation, or
bolted down onto an existing concrete plinth, refer to illustrations
below
Option 1:
New concrete foundation
Assemble foundation plate with
anchor brackets as shown in the
illustration
• Ensure that the M10
gearbox mounting bolts
are properly tightened
• Cable conduits must be
installed before pouring
the concrete
Option 2:
Bolting foundation plate onto
an existing concrete plinth
If bolting onto an existing
concrete plinth, place the
foundation plate down in the
correct position and use the plate
as a template for marking the
rawl bolt holes
Assemble foundation plate without
anchor brackets before bolting
down onto plinth
Ensure that the M10
gearbox mounting bolts
are properly tightened