Major tech MT1877IV Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Major tech MT1877IV. Major tech MT1877IV 16 pagina's. 1000v ac/dc trms multimeter
Pagina afdrukken
This symbol advises the user that the terminal(s) so marked
MAX
must not be connected to a circuit point at which the
1000V
voltage with respect to earth ground exceeds (in this case)
1000 VAC or VDC.
Equipment protected throughout by Double
Insulation (Class 11)
Equipment complies with current EU directives.
2. SYMBOLS AND ANNUNCIATORS
Continuity
Low Battery
Diode test
Data Hold
HOLD
Auto Ranging
AUTO
Alternating Current or Voltage
AC
Direct Current or Voltage
DC
Volts
V
A, mA, uA
Current range
3. OPERATION
To turn on the instrument turn the range knob from the OFF position to
any measurement range.
Note: For best battery life always turn the function switch to the OFF
position when the meter is not in use. This meter has Auto OFF that
automatically shuts the meter OFF if 15 minutes elapse between uses.
Note: On some low AC and DC voltage ranges, with the test leads not
connected to a device, the display may show a random, changing reading.
This is normal and is caused by the high-input sensitivity. The reading will
stabilize and give a proper measurement when connected to a circuit.
3.1. MODE BUTTON
To select AC or DC measurement when in Voltages, Amps, mA, uA, Ω,
, CAP.
3.2. BACKLIGHT BUTTON
1. Press the Backlight button, the blue back light will turn ON
2. Press the Backlight button again to turn the light off.
,
5