Major tech MT245 Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Major tech MT245. Major tech MT245 20 pagina's. Car battery tester

3.1.1. In Vehicle Battery Test

Ÿ The off vehicle test indicates that the

battery is not connected to the vehicle.

Clamp the red and black clamps of the

tester onto the tested battery, connect

the red to the positive and the black to

the negative, and the display screen will

immediately display the start-up

interface. The main interface appears 2

seconds after start-up.

Ÿ Press UP/DOWN key to select the

battery level, then press the ENTER key

to confirm.

Ÿ Press UP/DOWN key to select in vehicle

measurement, then press the ENTER

key to confirm.

Ÿ When the tester detects the surface

charge, it will prompt "surface charge,

turn on the lamp". Turn on the lamp as

prompted to remove the battery surface

charge, and the tester will display the

following messages in sequence: Battery

test

1. Select Battery Type

After selecting the battery charging state, the tester will prompt to select

the battery type, that is, select ordinary battery, AGM flat battery, AGM

winding battery, gel battery and EFB battery. Press the UP/DOWN key to

select the battery type, and then press the ENTER key to confirm.

Battery type selection

1. Ordinary battery

2. AGM flat battery

3. AGM wound battery

4. GEL

5. EFB

2. Battery Standard Selection:

The battery tester will test each battery according to the selected system

and rating. Press the UP/DOWN key to select according to the actual

system standard and the rating marked on the battery. Press the UP/DOWN