jali Cupboard - Multi Montagehandleiding - Pagina 7

Blader online of download pdf Montagehandleiding voor {categorie_naam} jali Cupboard - Multi. jali Cupboard - Multi 10 pagina's.
Ook voor jali Cupboard - Multi: Montagehandleiding (11 pagina's)

Fix with 25mm
WSH Screws
10. Place the Back
onto the assembled Box,
with the engraved label towards
the top, and facing up/outwards, as
shown. Slide the Back over until its top
edge aligns perfectly with the top edge of the
Box Top. Once in place, screw along the top edge
with 25mm WSH Screws, through the 3mm holes. Now fix down one side, accurately realigning the
Back edge to the Side as you go. Effectively you are using the Back to square up the Box. Once this
is done you can screw in all the remaining 25mm WSH Screws across the Back, securing it in place.
Assembly Instructions: Single Section Cupboard
11. Carefully stand the Box up. If it is too large
to do safely, you'll need to enlist some help.
Fit the uprights to the Sides by aligning the
cams and locking them into place. Ensure the
hinge holes face inwards.
Side
Upright
Back
Box Top
Page 7 of 10