Majorcom: PA360 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Majorcom: PA360. Majorcom: PA360 12 pagina's.

Setups

Installation

CAUTION : Before you begin, make sure your amplifier is disconnected from the power source, with the power

switch in the "OFF" position.

Choose input wire and connectors

HPA recommends using pre-built or professionally wired balanced line. 22 to 24 gauge cables. Figure 2.1

shows connector pin assignments for wiring.

Choose output wire and connectors

For the amplifier output connectors, HPA recommends using pre-built or professionally wired, high-quality, and

heavy gauge speaker wires. You may use EURO blocks for your output connectors. To prevent the possibility

of short-circuits, wrap or otherwise insulate exposed loudspeaker cable connectors.

Using the guidelines below, select the appropriate size wire based on the distance from amplifier to speaker.

The wire sizes apply to the 4-ohm tap.

NOTE : Custom wiring should only be performed by qualified personnel. Class 2 wiring is required.

CAUTION : Never use shielded cable for output power wiring

Services techniques et commerciaux : 56, chemin de la Flambère - 31300 TOULOUSE (France) • Tel. +33 (0)5 61 31 86 87 • Fax. +33 (0)5 61 31 87 73

Siège Social : RN 307 - 78810 FEUCHEROLLES • S.A. Capital 80.000 € • SIRET 334 579 869 000 28 • NAF 4652 Z • TVA Intracommunautaire FR 12334579869

MAJORCOM \ QUALITE \ ENREGISTREMENT DES DOCUMENTS \ ADMINISTRATIF \ ENR-12-PEM-V02

User Manual

[ Figure 2.1 Input wire and connectors ]

Distance

Up to 25 ft.

26~40 ft.

41~60 ft.

61~100 ft.

101ft~150 ft. 8AWG

151~200 ft.

www.majorcom.fr • [email protected]

Wire Size

16 AWG

14 AWG

12AWG

10AWG

6AWG