Jam HX-P230 Handmatig

Blader online of download pdf Handmatig voor {categorie_naam} Jam HX-P230. Jam HX-P230 2 pagina's. Speaker jam hx-p230

Pagina afdrukken

Where There's A Jam,

There's A Party!

READ UP.

HEY. HAVE WE SEEN YOU HERE BEFORE?

you're using it is like gold for the people who make these speakers. Do them a solid, will ya?

Por manual de instrucciones e información de garantía en español visítenos en

www.jamaudio.com

There are lots of cool Jam speakers. Check them all out at www.jamaudio.com

PACKAGE CONTENTS

Speaker

JUST CHARGE IT

Charging the speaker is so easy you've probably ﬁgured it out by now, but just in case, you've got

two options: you can charge it using your computer or a wall outlet.

1. The cord that came with

the speaker—the one with

the USB on one end and

the Micro USB on the

other—is made to work

with your computer.

Now go get ready for an epic night while your speaker does too. It needs about 3 hours to be fully

charged for 4 hours of play.

CONTROL YOUR DESTINY...OR AT LEAST YOUR SPEAKER

1. This is the power switch.

2. Push it to play, push it again to pause.

3. Turn the music up or down. (Wait, why do you

need to turn it down?)

4. Lets you know when Bluetooth is paired.

5. Hook it up Old-School.

6. The power cord goes here.

7. Check out how much juice is in the battery.

BLUETOOTH

CONNECTION: IT'S A SETUP

Like any amazing couple, this one starts with a connection—one between your device and the

speaker's Bluetooth.

Here's how it works:

1. We know you're probably going to think, "derp" with this one, but we have to say it: Make sure the

smartphone, tablet or computer you want to hook up to the speaker has Bluetooth. (There. We

got that out of the way.)

2. Turn on the speaker and look for the little blinking light.

3. Do whatever your device needs you to do on its end. (We don't know what you're using. We're

not spies.)

4. Look for Jam Classic in your device's Bluetooth list or click YES—whatever pops up on your

device—and BAM! you're connected.

5. Now hit PLAY on your speaker and crank it up—or down if you're lame.

You're probably only going to have to do this once, unless your device goes through a major

I-just-dropped-it-in-the-pool kind of reboot. The device and Bluetooth will ﬁnd each other every time

just as long as the speaker is set to Bluetooth and your device's Bluetooth is, you know—on.

If you're connecting to a computer, you may have some extra steps on that end. You'll have to get

that information from the computer company.

Depending on your device you may be prompted to enter a pairing code. If prompted enter "0000" as

the code.

Press and hold the PLAY/PAUSE button for 5 seconds to activate pairing mode.

ALLOW US TO SHED SOME LIGHT

What It Looks Like

Flashing RED

CHARGE

RED (while plugged in)

OFF (when plugged in)

Quick Flash BLUE

Slow Flash BLUE

RED

™

User Manual

Charging Cord

2. If you want to use the wall outlet, you'll

need to pick up a power cord with a Micro

USB the next time you're at the store, or

use any USB AC adapter, including the

one for your cell.

What it Means

Low Battery

Charging

Ready to Party

Pairing Mode

Connected

Line-in Mode

USER GUIDE AND WARRANTY INFORMATION

PARTY DOWN.

HX-P230