Bermar BRC10 Stap-voor-stap handleiding - Pagina 7

Blader online of download pdf Stap-voor-stap handleiding voor {categorie_naam} Bermar BRC10. Bermar BRC10 10 pagina's.

Figure 1-3 Using the Keypad

Required

Enable

Run

Required

Settings Key

Stop / Reset Key

UP / DOWN

Keys

UP & DOWN

Keys

Press and Hold

Running

Used to navigate through the drive's parameter settings and rotate

displayed parameters when the drive is running.

Used to reset the drive if there is an error and to stop the drive

running if enable/run configuration is set appropriately.

Used individually to increase or decrease editable values shown on

the drive display.

When both keys are pressed together, they provide the drive with a

latched RUN signal if enable/run configuration is set appropriately.

On the diagram above this indicates that the key should be pressed

and held for 1 second as opposed to a normal short press.

Inverter BRC10 Step by Step Guide