IKEA VALFRI Handmatig - Pagina 14

Blader online of download pdf Handmatig voor {categorie_naam} IKEA VALFRI. IKEA VALFRI 28 pagina's. Built-in oven
Ook voor IKEA VALFRI: Gebruikershandleiding (24 pagina's), Handleiding voor installatie-instructies (12 pagina's), Gebruiksaanwijzing (20 pagina's), Gebruiksaanwijzing (28 pagina's)

IKEA VALFRI Handmatig
ENGLISH
Setting the TIME DELAY
1. Set an oven function and temperature.
2. Press
again and again until
to flash.
3. Press
or
to set the time for
DURATION.
4. Press
.
5. Press
or
to set the time for END.
6. Press
to confirm.
Appliance turns on automatically later on,
works for the set DURATION time and stops
at the set END time. At the set time an
acoustic signal sounds.
7. The appliance deactivates
automatically. Press any button to stop
the signal.
8. Turn the knob for the oven functions and
the knob for the temperature to the off
position.
TIME DELAY works only for the
main oven.

Using the accessories

Warning! Refer to Safety
chapters.
Using the panel shield while grilling with
open oven door
When you use the grilling function with
open oven door it is necessary to attach the
panel shield below the control panel. It
prevents control panel damage because of
heat.
Warning! The shield will be very
hot when you use it while grilling.
Before you remove the shield
wait until it is cold. There is a risk
of burns.
1. Open top oven door.
2. Position the shield horizontally.
Setting the MINUTE MINDER
1. Press
starts
to flash.
2. Press
The Minute Minder starts automatically
after 5 seconds.
3. When the set time ends, an acoustic
signal sounds. Press any button to stop
the acoustic signal.
4. Turn the knob for the oven functions to
the off position.
Cancelling the clock functions
1. Press the
necessary function indicator starts to
flash.
2. Press and hold
The clock function goes out after some
seconds.
3. Make sure the text "For grilling use
only" is on top and you can read it.
The shield has magnets which let you
attach it below the control panel.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
again and again until
or
to set the necessary time.
again and again until the
.
14
starts