Jam HX-TT100 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Jam HX-TT100. Jam HX-TT100 2 pagina's.

Pagina afdrukken

TONE

ARM

CONTROL

BUTTONS

RCA to AUX cable (included)

RCA to RCA cable (available separately)

SOCKET

WHAT'S IN THE BOX

Turntable, RCA to RCA cable, AC power cord

USING THE TURNTABLE

When using the turntable for the first time, rotate the

transportation screw clockwise with a coin or screwdriver until

down. 

Plug the supplied power cord into the AC socket on the back of

the turntable and connect to the mains. Press the power button.

Remove the tone arm lock. 

Push the lift handle to raise the tone arm. 

Select the speed - 33, 45 or 78 RPM as required 

Remove the white plastic needle guard . Keep this in a safe

place, you'll need to put it back on when you're finished.

Put a record on the turntable. 

Move the tone arm to the desired position on the record .

The record will start turning as the tone arm moves across.

Pull the lift handle forward to lower the tone arm and the

record will start playing. 

Use the following control buttons during play:

stop the record turning

restart the record turning

When you have finished, either manually remove the tone arm

from the record by using the lift handle  and return to the

rest holder, or press the

button, which will automatically

lift and remove the tone arm. The record will stop turning

at this point. Press the power button to switch off the turntable.

CONNECTING TO SPEAKERS OR OTHER DEVICES

Connecting to Jam HX-TS100 Speakers

To connect the turntable to Jam HX-TS100 Speakers, use the

RCA to AUX cable supplied. Connect the RCA plugs to the L and

R sockets on the back of the turntable and the AUX plug to the

AUX socket on the back of the lead speaker.

Connecting to a device with RCA input

To connect the turntable to devices with RCA input, use an RCA

to RCA cable (available separately). Connect the RCA plugs on

one end of the cable to the L and R sockets on the back of the

turntable and the plugs at the other end to the corresponding L

and R sockets on the back of the device.

Connecting to a device with AUX input

To connect the turntable to a device with an AUX input, use the

RCA to AUX cable supplied. Connect the RCA plugs to the L and

R sockets on the back of the turntable and the AUX plug to the

AUX socket on the back of the device.

USING THE 45 RPM ADAPTOR

The 45 RPM adaptor allows you to play 45 RPM records:

1. Place the 45 RPM adaptor over the spindle

2. Gently place your 45 RPM record onto the turntable

3. Follow the operation instructions left to play your record.

MAINTENANCE

• DO NOT leave vinyl records on the turntable after use. Return

• the vinyl record to its original packaging and store.

• Return the tone arm to it's original place after use and secure

with tone arm lock.

• Replace the white plastic needle guard after use. Close the

turntable cover to avoid dust damage.

• Unplug the power cable and other cables after use.

• Please note, the stylus cartridge can be easily damaged and is

NOT included in the product warranty. For replacement

stylus cartridges, please contact Customer Service (details on

back of this leaflet).

WEEE EXPLANATION

This marking indicates that this product should not be

disposed with other household wastes throughout the EU.

To prevent possible harm to the environment or human health

from uncontrolled waste disposal, recycle it responsibly to

promote the sustainable reuse of material resources.

LISTEN RESPONSIBLY

To prevent possible hearing damage, do not listen at

high volume levels for long periods.