Gamut DI 150 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gamut DI 150. Gamut DI 150 16 pagina's. Dual mono integrated amplifier

How to operate

Select the desired source by pushing the but-

ton beside the name of the connected source.

A blue dot will light between the text and the

button to indicate the selected source. For ex-

ample to the right the CD input is selected.

The input selection can be toggled with the

remote control, please refer to the section

"Remote control"

In the middle of the DI 150 front panel you

will ﬁ nd the large volume control knob. On the

outside parameter of the knob a small blue dot

lights up to indicate the level setting. Turn the

knob by hand to the desired level. The scale

goes from approx 8 o'clock minimum level to

approx. 4 o'clock as maximum output level.

The output level can also be adjusted by the

remote control, please refer to the section

"remote control"

Please note: We have selected an expensive ALPS dual logarithmic potentiometer for setting the

listening level. To reduce noise, we have chosen a 1kOhm version. Such a potentiometer cannot make

the sound disappear completely, even when you turn it down to the lowest setting. If complete si-

lence is required, enable the Mute function described below.

The DI 150 features a mute function that will

efﬁ ciently mute the selected signal. Push the

"mute" button to activate the Mute function.

The blue dot indicating the selected source

is now replaced by a dot indicating the mute

function is enabled as shown below.

Push the Mute button again to disable the mute

function and return to the previously selected

source and level. For your comfort and the

safety of your equipment, please ensure before-

hand that the volume knob has not accidentally

been adjusted further towards the maximum out-

put setting before you disable the mute button.

DI 150

The Mute function can also be enabled and

disabled by the remote control, please refer to

the section "remote control".