Green Feathers HD Bird Box Camera Kit Snelstarthandleiding - Pagina 8
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Green Feathers HD Bird Box Camera Kit. Green Feathers HD Bird Box Camera Kit 16 pagina's.
Pagina afdrukkenHOW TO SET UP A WIRED CAMERA
Before you install the camera into your bird box, wire up the camera indoors near your
network router so you know that it is operating properly.
Connecting the weatherproof adaptor
Feed the end screw cap onto the Ethernet lead and then carefully add the red rubber
seal onto your lead. Now connect the white rubber seal with the cut-away that is on the
side. Add the other half of the connection onto your cable. Then feed the white rubber
connection in between the black ns, it will t but be careful not to break them. Once
the white part is in you can carefully feed the red rubber seal in and then screw the end
connection on. Now connect the Ethernet lead into the connection on the camera. Push
and twist the two connections together. Push the end cap over the ns and then screw it in
to place, this will be a rm connection so you may see the white bit pop out the end.
Connecting your camera
Connect the mains power supply lead into the PoE injector and the Ethernet cable from the
camera into the port marked PoE. Connect the shorter Ethernet cable into the LAN port
and the other end into an available port on your router.