JAM Pedals Pink Flow Handmatig

Blader online of download pdf Handmatig voor {categorie_naam} JAM Pedals Pink Flow. JAM Pedals Pink Flow 2 pagina's.

Pagina afdrukken

Pink Flow

What you hold in your

hands is our proposed

combination of JAM

pedals designs that equip

you with the essential

tools to not only bring your

"Pink" lines to life, but lift

them to a whole new level.

It offers a future-proof

and versatile array of

effects that will help you

"Shine On" in most live

and recording situations

you might find yourself in

down the road!

FEATURES

In seeking to make the Pink Flow

as versatile as possible, we have

proceeded to introduce the following

features:

· TAP tempo with subdivisions on

the Delay Llama.

· Delay Llama trails mode.

· External TAP tempo IN.

· Send / Return FX loop between the

Overdrive and Modulation sections

for you to place other effects in.

· True Bypass Relay Switching.

SIGNAL CHAIN

Seagull: the seagull effect heard

in "Echoes"! To properly operate the

Seagull effect:

― Make sure your guitar has passive

pickups.

― Engage the effect with the foot-

switch.

― Turn your guitar's volume knob all

the way up.

― Change the effect's pitch by

manipulating your guitar's tone pot.

Dyna-ssoR: A realisation of

our inspiration to combine a Ross

Compressor

and a vintage

DynaComp

using the extremely rare

NOS CA3080 chip.

― LVL controls the Dyna-ssoR's level

― SUS sets the amount of compression

/ sustain.

Tubedreamer: a JRC4558D

equipped 808 style overdrive

offering a carefully tuned, midrange

frequency register, that delivers

warm and rich overdriven sound

through any amp. Features a high-

gain footswitch.

― LVL controls the Tubedreamer level.

― TONE adjusts the tone.

― GAIN sets the gain level.

― Toggle-switch selects between

High and Low Gain stages.

Red Muck: a Fuzz / Distortion pedal,

inspired from the circuits of the '71

"triangle" and the later "Red Army /

Civil War" Muff.

― LVL controls the Red Muck's level.

― TONE adjusts the tone.

― GAIN sets the gain level.

― Toggle-switch selects between

symmetrical or asymmetrical

clipping.

FX Loop Send / Return: Connect

other effect/s to place them AFTER

the Red Muck and BEFORE the

WaterFall. SEND goes to said

pedals' input and RETURN receives

the output.

WaterFall: a smooth, lush-sounding

Chorus / Vibrato pedal, featuring

BBD chips, with 2 toggle-switches,

one to select between chorus and

vibrato modes, and another to

switch to a wetter effect.

― DEPTH sets the depth of the effect

― SPEED sets the speed of the effect

― LEFT toggle-switch selects between

subtle and more intense modulation

response.

― RIGHT toggle-switch selects

between Chorus and Vibrato modes

― Internal Trimmer sets the maximum

modulation speed.

Ripple: Smooth, sweet and

transparent 2-stage phaser pedal,

with a single SPEED control setting

the effect's rate.

Delay Llama: A fully analog,

BBD chip, delay pedal with a

maximum delay time of 600ms,

Tap Tempo, HOLD function, and

Delay Time expression pedal input.

Features a two-position toggle-

switch for trails mode ON/OFF and

external Tap Tempo input

― TAP Footswitch sets the tempo

of your repeats. Prolonged pressing

will engage the HOLD function.

― Sub-division toggle-switch

for tapping in 3 different note values

― TIME sets the delay time

― LVL sets the MIX level of the repeats

on top of the dry signal.

― REPEATS sets the amount of repeats

― TRAILS toggle-switch: right side is

ON / left side is OFF, allows for

the effect's repeats to fade out

gradually after you have turned the

Delay Llama off. There is also an

internal trimmer to determine the

decay of the Trails!

― Internal trimmer to adjust the

maximum amount of repeats

dramatically affecting the HOLD

function's response.

― TAP input allows you to remotely

control the tempo of your repeats

― EXP expression pedal input to

control the delay time (we

recommend our EXP1 expression

pedal for ensured compatibility).

SPECIFICATIONS

― True or Buffered Bypass (TRAILS)

― Works with 9V boss-type DC adaptor

(tip-negative)

― Uses MAX 260 mA of power when

Engaged, 110 mA in Bypass

― Dimensions: 40 x 17 x 6.7 cm