Airflow Uno hab Handleiding voor installatie en gebruik - Pagina 6

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Airflow Uno hab. Airflow Uno hab 16 pagina's. Cavity wall decentralised mechanical ventilation with heat recovery unit
Ook voor Airflow Uno hab: Instructies (2 pagina's), Installatiekit (16 pagina's), Onderhoudshandleiding (2 pagina's)

Pagina afdrukken

IMPORTANT

ATTENTION

CHAPTER 3

SCOPE OF

DELIVERY

2.8

Fireplaces

The relevant applicable rules for the joint operation of fireplaces, ventilation, extraction hoods must be observed!

General building regulation requirements

The ventilation units with heat recovery Unohab can only be installed and operated in rooms with other room air-

dependent fireplaces if the exhaust duct is monitored by special safety devices, which switch off the ventilation unit

when required.

We recommend that you consult the responsible chimney sweep in order to accommodate your wishes before

purchasing an underpressure monitoring system for fireplaces.

2.9

Protection against contact

The ventilation units are delivered with a fan protection guard as standard.

2.10 Motor protection device

The ventilation units have an energy-saving, maintenance-free EC motor (interference-free, ball bearing-mounted)

with the highest efficiency factor, blocking protection and electronic restart.

2.11 „Waterproof cover" of the stainless steel external grille

The stainless steel external grille is a visual part and does not serve as water proof cover.

The installation of wall installation sleeve through the outer facade has to be carried out on site and appropriate

safety measures must be taken!

2.12 Limits of use stainless steel

Stainless steel 1.4301 (304) can change colour slightly due to air pollution!

Regular cleaning reduces the risk of discolouring.

When used in cities and industrial areas with strong air pollution this stainless steel is endangered by corrosion to a

certain extent.

In environments with strong air pollution and in coastal areas with a high salt concentration in the air, this stainless

steel is not suitable without additional protective lacquering (acrylic clear lacquer).

3.0

Scope of delivery

Leave the unit in its packaging until just before the respective installation step or installation in order to prevent any

possible damage and contamination.

Unit

Consisting of:

Design-inner panel with filter

– White plastic design-inner panel with integrated

air flow and ISO Coarse 50% filter

Fan unit

– EC axial fan with 2-part connector

– EPP half shell (base body)

– Ceramic heat accumulator

– Flow straightener

– Fan protection guard

– Pull-out tool

– Protection guard

Unohab Unit

Part no: 90000993

Unit

Installation and Operating Instructions

fig.1