ENGLISH
Buttons
Button
Minus, plus
,
Heat-up and residual heat indicator
When you activate an oven function, the
bars in the display
The bars show that the oven temperature
increases or decreases.
Clock functions
Sym-
Function
bol
Minute Minder
Time of day
Duration
End
Press
again and again to change
the clock function.
Press
to confirm the settings of the
clock functions, or wait 5 seconds for
the setting to be confirmed automatically.
Setting the Duration or End function
1. Press
again and again until the sym-
bol
or
flashes in the display.
2. Press + or - to set the minutes.
3. Press
to confirm.
4. Press + or - to set the hour.
5. Press
to confirm.
Function
Description
Clock
To set a clock function.
To set the time.
come on one by one.
To set a countdown time.
To set, change or check the time of day. Refer to "Setting the
time of day".
To set how long the appliance must operate. First set an oven
function before you set this function.
To set when the appliance must be deactivated. First set an
oven function before you set this function. You can use Dura-
tion and End at the same time (Time Delay) to set the time
when the appliance must be activated and then deactivated.
When you deactivate the appliance, the
display shows the residual heat indicator
if the temperature in the oven is more than
40 °C. Turn the temperature knob left or
right to show the oven temperature on the
display.
Description
6. When the set time ends, the symbol
or
and the set time flash. The acous-
tic signal sounds for two minutes. The
appliance deactivates. Press a button
or open the appliance door to stop the
signal.
If you press
for Duration
switches to setting the End
Setting the Minute Minder
Used to set a countdown time. The maxi-
mum time you can set is 2 hours 30 minutes.
This function has no effect on the operation
of the oven. You can set the Minute Minder
at any time, also if the appliance is off.
1. Press
again and again until
00 flash in the display.
while setting the time
, the appliance
function.
and
11
Pagina afdrukken