IKEA FRAMTID DATID HGA5K Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} IKEA FRAMTID DATID HGA5K. IKEA FRAMTID DATID HGA5K 36 pagina's.

Pagina afdrukken
ENGLISH

Table of contents

Safety Information

Your safety and the safety of others are very
important.
This manual and the appliance itself provide
important safety messages, to be read and
observed at all times.
This is the safety alert symbol,
pertaining to safety, which alerts users
to potential hazards to themselves and
others.
All safety messages will follow the safety
alert symbol and either the terms:
DANGER Indicates a hazardous
situation which, if not avoided, will
cause serious injury.
WARNING Indicates a hazardous
situation which, if not avoided, could
cause serious injury.
All Safety messages will tell you what the
potential hazard is, tell you how to reduce
the chance of injury, and tell you what can
happen if the instructions are not followed.
The appliance must be disconnected from
the power supply before carrying out any
installation work.
Installation and maintenance must be
carried out by a qualified technician, in
compliance with the manufacturer's
instructions and local safety regulations to
the relevant gas standard. Only use original
spare parts. Do not repair or replace any
part of the appliance unless specifically
stated in the user manual.
WARNING If the information in this
manual is not followed exactly, a fire or
explosion may result causing property
damage or injury.
4
6
7
7
8
9
-
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this appliance.
What to do if you smell gas:
-
Do not try to light any appliance.
-
Do not touch any electrical switch.
-
Do not use any phone in your building.
-
Immediately call your gas supplier from
a neighbor's phone. Follow the gas
supplier's instructions.
-
If you cannot reach your gas supplier,
call the fire department.
-
Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
-
Use appliance in well ventilated rooms
only.
-
The electrical and gas connections must
comply with local regulations.
-
When the hob is installed, provide a
multi-pole circuit breaker with a contact
separation of at least 3 mm, that
provides full disconnection.
-
Regulations require that the appliance is
grounded.
-
The power cable must be long enough
for connecting the appliance, once fitted
in its housing, to the power supply
-
Use only flexible or rigid metal hose for
gas connection.
-
If necessary, the electrical power
cable must be replaced exclusively
with a power cable having identical
characteristics to the original supplied
by manufacturer (type H05V2V2-F 90°C
or H05RR-F). This operation must be
4
10
1 1
1 1
15
16