Bernard Controls BT Opstarthandleiding - Pagina 5

Blader online of download pdf Opstarthandleiding voor {categorie_naam} Bernard Controls BT. Bernard Controls BT 12 pagina's. Separated box

3.2 Pre-requisites

Documents

 Actuator start-up guide

and the present guide

 Wiring

diagram

actuator

How to install the actuator and the separated box

1. Install the actuator on the valve flange and the separated box

on its support (not supllied).

2. Wire the actuator connection compartment (1) according to

the wiring diagram supplied.

3. Connect the separated box to the actuator by wiring the

separated box connection compartment (2).

4. Wire the connector (3) to your power supply and controls.

5. Fit the connector on the separated box.

Actuator (1) should be secured directly on the valve using proper

bolts or via a proper interface. After assembly, the actuator can

operate in any position.

However:



do not handle the actuator by handwheel (9) to avoid damage on



actuator gearing.



cable glands must not be oriented upwards (loss of water tightness).



It is recommended not to position motor downwards.

Box has a flange (10) to be fastened on a support with 4 M6 screws.

English

Equipment

 No. 10 socket-end wrench

 1.5×10

your

 2 adjustable wrenches

 2.5mm Allen key

 Stripping pliers

 Crimping pliers for 6.35mm

max

screwdriver (optional)

crimp receptacle lugs

flat

blade