HIKVISION H1T Series Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION H1T Series. HIKVISION H1T Series 14 pagina's. Turbo hd dome camera
Ook voor HIKVISION H1T Series: Gebruikershandleiding (15 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (14 pagina's), Gebruikershandleiding (14 pagina's)
Pagina afdrukken
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not place the camera in extremely hot, cold, dusty
or damp locations, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is
required for operating environment.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
1 Introduction
1.1 Product Features
The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
High performance CMOS sensor
Low illumination, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR
IR cut filter with auto switch
OSD menu with configurable parameters
Auto white balance
internal synchronization
SMART IR mode
3-axis adjustment
1.2 Overview
Note:
This manual applies to two types of turret cameras.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
Enclosure
Main Body
Mounting Base
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
DC 12V
Power Cord
Figure 1-2 Overview of Type II Camera
Trim Ring
Video Cable
DC 12V
Power Cord
Video Cable
Clip Plate
Mounting Base
Enclosure
Camera