Ganz DAY/NIGHT VANDAL DOME CAMERA Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ganz DAY/NIGHT VANDAL DOME CAMERA. Ganz DAY/NIGHT VANDAL DOME CAMERA 4 pagina's. Day/night vandal dome camera

Pagina afdrukken
SPECIFICATION
MODEL
General Spec
CCD Type
1/3" 410K Pixels Color
Total number of pixels
811(H) X 508 (V)
Min illumination
0.3 Lux/F1.2(50 IRE, AGC HIGH, DNR HIGH)
Video Output
1.0Vp-p/75 ohm Composite
Resolution
520 TV Lines(Min)
S/N Ratio
50dB (AGC off, weight ON)
Shutter speed
x128 : 1/60~1/120,000sec
Sync System
Internal / External
ATW/AWC/MANUAL (1800 ˚ K ~ 10,500 ˚ K)
White Balance
OSD
Built-in
DAY / NIGHT
AUTO / B/W / COLOR
DNR
LOW, MIDDLE, HIGHT,OFF
Connector
Power Input
Wire
Video Output
BNC Cable
Electric Spec
Voltage
DC 12V(10 - 20V) or AC24V(20 - 28V)
Power Consumption
Max [DC12V : 5.7 W , AC24V : 5.3 W]
Mechanical Spec
Lens
3.3~12.0 mm
Dimension
300(ø) X 267.6(H)mm
Weight
850g
Case Color
Ivory
Operation temp
-10 ℃ ∼ +55 ℃
-20 ℃ ∼ +70 ℃
In storage temp
Operation humidity
Under 90 ％ (Non-condensing)
INSTALLATION
E
F
D
C
A
B
DAY/NIGHT VANDAL DOME
VRD135-90-DNR-TDN3-AC3V
NTSC
1/3" 470k Pixels Color
795(H) X 596(V)
x128 : 1/50~1/120,000sec
PAL
1
Use the supplied L-wrench to remove the four
fixing screws (B) of dome cover (A).
2
Align the camera unit with the surface of the ceiling,
make marks on the ceiling in the places where the
screw holes are to be drilled, and then drill the four
holes.
3
Cut a hole (diameter2.9in.73mm) in the ceiling for
routing
the cables.
4
Pass the power cable (E) and video cable (F) from the
camera unit through the cable hole in the ceiling.
5
Align the four screw holes in the camera unit (D) with
the screw holes in the ceiling, and then secure the
camera in place by tightening the four or more screws
(C) throught the washers.
6 Carry out the settings and adjustments for the camera.
7 Secure the dome cover (A) by tightening the screws (B).