GREEN LOO SCANDI-POD Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} GREEN LOO SCANDI-POD. GREEN LOO SCANDI-POD 8 pagina's.

INSTALLATION PLANNING

It's all in the planning!

For proper operation of the toilet you should consider a number of issues.

The design of the site and building needs to allow for:

• An elevated starting point for liquid to flow by gravity from the toilet down into a liquid absorption trench

which is to be dug outside the toilet. The whole toilet needs to sit on level ground, IF ANYTHING SLOPING

SLIGHTLY BACKWARDS.

• Space for the toilet and a firm, dry and sheltered base for it to sit.

• Adequate access to service and maintain the toilet, i.e. remove the full container and replace it with an empty

one.

• Good ventilation to provide oxygen and evaporate liquids

• Electrical supply (240VAC or 12VDC) to the fan location

The Scandi-Pod is supplied as a kit containing most of the components required and can be installed using basic

building tools and materials available at plumbing suppliers or hardware shops

Installation of the Scandi Pod involves:

1. Preparing a flat, level and firm base for the composting container to sit

2. Installing the ventilation pipe-work, including fan and vent cowl

3. Connecting the ventilation pipe work, electrical connection and excess liquids pipe

4. Preparing the excess liquids dispersal trench

5. Final checks before use

Space Required

There is no ideal set of measurements which will suit all applications but you do need to provide enough space

to locate and install the toilet, enough space to fit and maintain the air vent piping and fan and enough space to

access and exchange the containers, so allow space to remove and store the bins.

•

Don't plan to install a light directly over the pedestal/waste chute as this will attract flying insects.

•

Don't use your toilet fan. It's suction works against the suction of the fan of the Scandi – Pod.

Most Scandi-Pods are installed indoors and are usually screwed or glued to the floor.

Vent System

The Scandi-Pod airflow requirement is provided by 75mm pipe and incorporates a continuous running fan

(supplied). Consider how the fan will be powered (240VAC or 12VDC) and ensure the fan housing is

accessible for maintenance. Ensure correct airflow of the fan away from the toilet.