Airflow ecoDRY 550 ABS Installatie- en bedieningshandleiding - Pagina 5

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Airflow ecoDRY 550 ABS. Airflow ecoDRY 550 ABS 6 pagina's.

The appliance is not intended for use by people with reduced physical, sensory or mental capability

or lack of experience and knowledge, unless they are supervised by a responsible person. Children

should also be supervised at all times when using this hand dryer.

Warning – in the rare case of a thermal overload (over heating of the motor), a thermostat with

automatic reset protection will suspend the operation of the motor. The thermostat will automatically

reset the motor after 10 – 15 minutes when the specific motor temperature drops below 100°C.

General Warnings



Do not use this product for a function different to which it is intended



Do not expose the appliance to the elements such as rain, sun etc.



Do not make any changes to the device



Do not obstruct the air outlet point or air inlet grille



Do not insert any object into the air outlet or air inlet grille



In case of failure/ malfunction, disconnect from the power supply and call your installer

6. Troubleshooting

1. The dryer blows cold air – the dryer will warm up after use as the heat is generated from the

operation of the motor. This is normal operation.

2. The dryer runs continuously – decrease the sensitivity of the activation sensor by turning the

white potentiometer on the board located inside the main body of the dryer (see Figure 5)

anti clockwise with a pot adjustor/ small screw driver. Adjust to suit the level of sensitivity

required.

3. The dryer does not operate – check all connections, if this fails please contact your installer.

Please visit airflow.com/ FAQs for assistance

Figure 5

Page 5 of 6