CeoTronics CT-DECT Base Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} CeoTronics CT-DECT Base. CeoTronics CT-DECT Base 14 pagina's. Headset for wireless duplex communication
Ook voor CeoTronics CT-DECT Base: Gebruiksaanwijzing (20 pagina's), Gebruiksaanwijzing (20 pagina's), Gebruiksaanwijzing (14 pagina's), Gebruiksaanwijzing (20 pagina's)
Pagina afdrukken2.6
Unit with Lightweight Headset
The Lightweight Headset (for example see Fig. 4) is a particularly lightweight, foldable headset with one
or optionally two speakers. It might be equipped as follows: adjustable headband (Fig. 4/a), noise
cancelling microphone with windshield (f) and flexible goose neck (e), speaker on one side (b),
connecting cable without or with PTT button (g) and plug (h) for connection to the unit.
The microphone mounting (d) and the speaker mounting (c) are rotatable on the headband. The goose
neck (e) is slidable and turnable in the microphone mounting.
2.7
Unit with ContactCom Communication Set
ContactCom is a communication set, e.g. for use with helmets, headbands, respirator masks. Fig. 5
shows a ContactCom communication set with an universal-type helmet adapter that is preferably
installed into helmets, the helmet insert of which is fitted with an all round headband. Installation can be
effected on the right or left inside the helmet.
It consists of the following: universal aluminium fastening with spring steel strip (Fig. 5/a) and metal
clip (e), contact microphone (b), speaker (f), connecting cable with plug (g) for connection to the unit.
The contact microphone and speaker are normally attached by the factory to the universal fastening
and connected to each other via a cable (d). The universal fastening is fastened to the headband
inside the helmet by means of the metal clip (e). Other ContactCom communication sets with special
fastening components are available
2.8
Unit with BoomMike Speaker Unit
The BoomMike Speaker Unit with universal metal clip (for example see Fig. 6) is preferably built into
helmets in which the helmet insert is equipped with an all-round headband. The BoomMike Speaker
Unit can be equipped as follows: metal clip (Fig. 6/d) for fastening the microphone/speaker unit to the
headband inside the helmet, noise cancelling microphone with windshield (a) and flexible goose neck
(b), speaker (c) in a plastic housing, connecting cable with plug (e) for connection to the unit.
2.9
Unit with Throatmike Comfort
The Throatmike Comfort (for example see Fig. 7) is preferably used for communication in conjunction
with protective suits, helmets and masks. It can be equipped as follows: throat microphone (Fig. 7/c)
with an elastic stretch necklet (b) and connecting cable to the matching unit (g), earphone (f) and
flexible earhanger (e), connecting cable to the matching unit (g), matching unit and connecting cable
with plug (h) for connection to the unit.
2.10 Communication sets with PTT button
In the case of communication sets with PTT button (see examples Fig. 2, 3, 4) for speaking the PTT
button (PTT = push-to-talk) has to be pressed down. By pressing the PTT button the microphone of the
communication set is switched on. You can speak into the microphone as long as you keep the PTT
button pressed and at the same time you can receive a message. Upon release of the PTT button the
microphone is switched off and you can receive only.
7