HIKVISION HWT-B310-VF Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION HWT-B310-VF. HIKVISION HWT-B310-VF 12 pagina's. Hd vari-focal bullet & turret & dome camera
Pagina afdrukken
3. Loosen the screws on the bubble of the dome
camera to remove the bubble and the black liner.
4. Attach the mounting base to the ceiling, and secure
them with supplied screws.
Figure 2-10 Secure the Mounting Base
Note:
In the supplied screw package, both self-tapping
screws and expansion bolts are contained.
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cable and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
8. Fit the black liner back to the camera and tighten
the screws on the bubble of the dome camera to
finish the installation.
3 Menu Description
Purpose:
Call the menu by clicking button
interface, or click Iris+.
Steps:
1. Connect the camera with the TVI DVR, and the
monitor, shown as the figure 3-1.
Camera
Pan Position
[0° to 355°]
Tilt Position
[0° to 75°]
Rotation Position
[0° to 355°]
Figure 2-11 3-Axis Adjustment
TVI DVR
Figure 3-1 Connection
on the PTZ Control
Monitor