IKEA GRILJERA Gebruikershandleiding - Pagina 23

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} IKEA GRILJERA. IKEA GRILJERA 36 pagina's.
Ook voor IKEA GRILJERA: Gebruikershandleiding (16 pagina's), Handmatig (16 pagina's)

Pagina afdrukken

ENGLISH

Installation

This appliance is in Class 1 (free standing

appliance).

After unpacking the product, make sure that it

has not been damaged during transport and

that the oven door closes properly. In the

event of problems, contact the dealer or your

nearest Authorized Service Centre. To prevent

any damage, only remove the product from its

packaging base at the time of installation.

This appliance is not design for island

installation.

Preparing the housing unit

Kitchen units in contact with the oven must be

heat resistant (min 90°C).

Carry out all cabinet cutting work before

fitting the oven in the housing and remove all

wood chips and sawdust.

After installation, the bottom of the oven must

no longer be accessible.

For correct appliance operation, do not

obstruct the minimum gap between the

worktop and the upper edge of the oven.

General recommendations

Before use

Remove cardboard protection pieces,

protective film and adhesive labels from

accessories.

Do not remove the rating plate situated in the

internal surface of the drawer

Remove the accessories from the oven and

heat it at 200° for about an hour to eliminate

the smell and fumes from the insulating

materials and protective grease.

During use

Do not place heavy objects on the door as

they could damage it.

Do not cling to the door or hang anything

from the handle.

Do not cover the inside of the oven with

aluminium foil.

Never pour water into the inside of a hot

oven; this could damage the enamel coating.

Never drag pots or pans across the bottom of

the oven as this could damage the enamel

coating.

Make sure that the electrical cables of other

appliances do not touch hot parts of the oven

or become trapped in the door.

Do not expose the oven to atmospheric

agents.

How to install the feet

The appliance is equipped with 4 feet that

are used for possible height alignment with

the cabinets. To fit them, tilt the appliance and

screw the 4 feet in the special threads located

in the corners (see Fig. 1).

Fig. 1