IKEA KULINARISK Handmatig - Pagina 29

Blader online of download pdf Handmatig voor {categorie_naam} IKEA KULINARISK. IKEA KULINARISK 40 pagina's. Oven with steam feature
Ook voor IKEA KULINARISK: Gebruiksaanwijzing (20 pagina's), Gebruikershandleiding (36 pagina's), Gebruikershandleiding (16 pagina's), Gebruikershandleiding (36 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (36 pagina's), Gebruiksaanwijzing (48 pagina's), Gebruiksaanwijzing (36 pagina's), Handmatig (24 pagina's), Handleiding voor installatie-instructies (36 pagina's), Handmatig (20 pagina's), Handmatig (44 pagina's), Gebruikershandleiding (36 pagina's), Handmatig (40 pagina's), Gebruikershandleiding (20 pagina's), Handmatig (37 pagina's), Handmatig (32 pagina's), Snelstarthandleiding (16 pagina's), Handmatig (20 pagina's), Handmatig (20 pagina's), Handmatig (36 pagina's), Handmatig (21 pagina's), Snelstarthandleiding (8 pagina's), Handmatig (40 pagina's), Handmatig (20 pagina's), Handmatig (32 pagina's), Handmatig (36 pagina's), Handmatig (17 pagina's)

IKEA KULINARISK Handmatig
ENGLISH
3. Close the oven door halfway to the first
opening position. Then lift and pull
forward and remove the door from its
seat.
4. Put the door on a soft cloth on a stable
surface.
5. Hold the door trim (B) on the top edge
of the door at the two sides and push
inwards to release the clip seal.
2
B
6. Pull the door trim to the front to remove
it.
7. Hold the door glass panels by their top
edge and carefully pull them out one by
one. Start from the top panel. Make sure
the glass slides out of the supports
completely.
1
8. Clean the glass panels with water and
soap. Dry the glass panels carefully. Do
not clean the glass panels in the
dishwasher.
When the cleaning is completed, install the
glass panels, the door trim and the oven
door, close the levers on the both hinges.
Make sure that you put the glass panels (A,
B and C) back in the correct sequence.
Check for the symbol / printing on the side
of the glass panel, each of the glass panels
looks different to make the disassembly and
assembly easier.
The screen-printing zone must face the
inner side of the door. Make sure that after
the installation the surface of the glass
panel frame on the screen-printing zones is
not rough when you touch it.
When installed correctly the door trim clicks.
29