Britax-Romer EVOLVA 123 SL SICT Gebruiksaanwijzing

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Britax-Romer EVOLVA 123 SL SICT. Britax-Romer EVOLVA 123 SL SICT 2 pagina's. 9 to 36 kg. 9 months to 12 years of age

Pagina afdrukken

Britax-Romer EVOLVA 123 SL SICT Gebruiksaanwijzing

PAGE I

1. PRODUCT OVERVIEW

ISOFIX fastening points (car)

ISOFIT Locking button

ISOFIX insertion aids

ISOFIT locking arms

Headrest adjuster

SICT

Backrest

Cover ﬂap

Compartment for the user instructions

ISOFIT adjustment button

If you have any questions regarding the use of the product, please feel free to contact us:

BRITAX RÖMER Kindersicherheit GmbH

Blaubeurer Strasse 71

T.: +49 (0) 731 9345-199/-299

D-89077 Ulm

F.: +49 (0) 731 9345-210

Germany

E.: [email protected]

www.britax.eu

BRITAX EXCELSIOR LIMITED

1 Churchill Way West

T.: +44 (0) 1264 333343

Andover

F.: +44 (0) 1264 334146

Hampshire SP10 3UW

E.: [email protected]

United Kingdom

www.britax.eu

5. CHANGING THE HARNESS

Removing the 5-point harness

1. Loosen the harness straps as far as possible (see 9.1).

2. Push the shoulder strap adjuster

all the way up

(see 8.1).

3. Unhook the shoulder straps

from the connecting

piece

4. Clip the connecting piece

at the bottom of the

backrest

into its holder

5. Push down the strap loops of the shoulder pads

from the base of the shoulder strap adjuster

6. Pull the shoulder straps

and the strap loops of the

shoulder pads

out of the belt slots.

7. Undo the Velcro fastener on the crotch cushion

remove it.

8. On the bottom of the seat, unhook the adjusting strap

from the metal plate

9. Turn the metal plate

(that holds the harness buckle

to the seat shell) on end and push it upwards

through the belt slot

10. Release the harness buckle

11. Push the straps and buckle tongues

through the lap

belt slots in the cover.

12. Place the harness buckle

under the cover and inside

the storage compartment

of the backrest

13. Push the adjusting strap

under the cover.

14. Fix the shoulder pads

and shoulder straps

rubber loops

at the feed-through points

Installing the 5-point harness

►

To install the straps, follow the steps in reverse order.

DANGER! Tug on the shoulder straps ﬁrmly

sure that the 5-point harness is secure.

DANGER! Never use installation method A for the child safety seat unless

the harness buckle and shoulder pads are properly attached (the straight

edges of the shoulder pads must be pointing towards each other). Make

sure that the metal plate of the harness buckle is correctly attached.

WARNING! Ensure that the straps are not twisted, that they have not been

accidentally interchanged and that they have been correctly inserted in the

belt slots on the cover.

2. APPROVAL

BRITAX RÖMER

Tested and approved according to ECE* R 44/04

*ECE = European Standard for Child Safety Equipment

Vehicle child

safety seat

Group

EVOLVA 1-2-3 SL

SICT

II+III

The child safety seat has been designed, tested and approved according

to the requirements of the European Standard for Child Safety Equipment

(ECE R 44/04). The seal of approval E (in a circle) and the approval number are

located on the orange approval label (sticker on the child safety seat).

DANGER! This approval will be invalidated if you make any modiﬁcations to

the child safety seat. Only the manufacturer is permitted to make modiﬁca-

tions to the child safety seat.

WARNING! Use the EVOLVA 1-2-3 SL SICT exclusively for securing your

child in your vehicle. It is in no way suitable for use as a seat or toy in the

home.

DANGER! Never secure your child or the child safety seat with a 2-point

belt. If you secure your child in the child seat with only a 2-point belt, this

may cause serious injuries to your child in the event of an accident and could

even result in their death.

3. SAFETY NOTES

Please take the time to read these instructions carefully and keep them

to hand in the intended storage compartment 05 on the child safety seat at

all times! The instructions must be kept with the child safety seat if the latter

is passed on to a third party.

6. CARE AND MAINTENANCE

Please ensure that you only use original BRITAX RÖMER replacement

covers, as the seat cover is an integral part of the child safety seat and fulfils

important functions to ensure the smooth operation of the system. Replace-

ment covers are available from your dealer.

•

The cover can be removed and washed in accordance with the instruc-

tions on the wash care label.

•

The plastic parts can be cleaned using soapy water. Do not use any caus-

tic cleaning agents (such as solvents).

DANGER! The child seat must not be used without the seat cover.

Never remove the buckle tongues 30 from the straps.

CAUTION!

Removing the cover

and

Adjust the headrest by moving it up

Unhook the edge of the cover and the rubber loops on

the back of the headrest

Pull o the cover of the headrest

Unhook the rubber loops from the retaining screws on

the backrest

Loosen the shoulder straps

Undo the Velcro fastener on the crotch cushion

remove it.

Open the snaps on the left and right-hand sides of the

backrest cover

Unthread the harness buckle

from the cover.

On the bottom of the seat, unhook the rubber loop of

in the

the cover from the retaining screws and cover ﬂaps

10. Working from the side, carefully pull the edge of the

cover on the backrest

11. Slide the cover with opening over the headrest

to make

►The cover can now be washed in accordance with the

instructions on the wash care label.

Re-ﬁtting the cover

►Proceed in reverse order to re-ﬁt the cover.

WARNING! Ensure that the straps are not twisted and

that they have been correctly inserted in the belt slots on

the cover.

DANGER! For the protection of your child:

In the event of an accident at a collision speed of more than 10 km/h, the child

safety seat may be damaged without the damage becoming immediately visible. In

this case, the child safety seat must be replaced. Please dispose of it properly.

• Always have your child safety seat checked if you suspect it may have been

damaged (e.g if it falls on the ground).

Body weight

• Regularly check all important parts for damage. Ensure that all mechanical parts,

in particular, are fully functional.

9 to 18 kg

• Never lubricate or oil parts of the child seat.

• Never leave your child unattended in the child seat in the vehicle.

15 to 36 kg

• Only allow your child to enter and exit the vehicle on the pavement side.

• Protect the child safety seat from intensive direct sunlight when it is not in use.

The child safety seat can get very hot in direct sunshine. Children's skin is sensi-

tive and could be harmed as a result.

• The more snugly the belt ﬁts over your child's body, the better they will be protected.

Avoid putting thick clothes on your child under the belt.

• Take regular breaks on long journeys in order to give your child the opportunity to

run about and play.

• Use on the rear seat: Move the front seat far enough forwards to ensure that your

child's feet cannot hit the backrest of the front seat (to prevent risk of injury).

• If your child tries to open the red ISOFIT safety button 06 or a buckle, stop the

vehicle as soon as it is safe to do so. Check whether the child safety seat is correctly

fastened and ensure that your child is correctly secured. Explain to your child the

dangers associated with their actions.

DANGER! For the protection of all vehicle occupants:

In the case of an emergency stop or an accident, unsecured persons or objects may

cause injury to other vehicle occupants. Please always check that:

• the backrests of the vehicle seats are locked, e.g. that a foldable rear seat bench

latch is engaged.

• all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are

secured.

• all persons in the vehicle have their seat belts fastened.

• the child safety seat is always secured when it is in the vehicle, even if no child is

being transported.

WARNING! For your protection when handling the child seat:

• Never use the child safety seat free standing, not even for test sitting.

• To avoid damage, ensure that the child safety seat is not jammed in between

hard objects (car door, seat rails, etc.).

• Keep the child safety seat in a safe place when it is not in use. Do not place any

heavy objects on the seat and do not store it directly next to sources of heat or in

direct sunlight.

7. HARNESS BUCKLE CARE

To ensure the safety of your child, it is absolutely essential that the harness

buckle continues to function correctly. Harness buckle malfunctions are usually

caused by a build-up of soiling or by external objects.

Possible faults:

• When you press the red release button, it takes a long time for the buckle

tongues to be ejected.

• The buckle tongues no longer engage (i.e. when you try to push them in, they

pop out again).

• The buckle tongues engage without an audible "click".

• The buckle tongues are di cult to push in (you feel a certain amount of

resistance).

►Remedy: Clean the harness buckle so that it functions properly again:

Cleaning the harness buckle

(see 9.1).

1. Remove the harness buckle

2. Soak the buckle

liquid for at least an hour.

3. Rinse the buckle

4. Turn the metal plate

(see 9.2).

through the belt slot

and

seat shell.

5. Turn the metal plate

into the metal plate

DANGER! Tug hard on the harness buckle

and the adjusting strap

sure that it is secure.

6. Push the crotch cushion

Velcro fastener to ﬁx it to the harness buckle.

DISPOSAL:

over the SICT

Please observe the waste disposal regulations in your country.

Disposal of packaging

Seat cover

Plastic parts

Metal parts

Belt straps

Buckle and tongue

4. USE IN THE VEHICLE

Please observe the instructions for using children's restraining systems in the operating

instructions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems

(see type list) and in vehicles with a 3-point belt.

To determine which seats are approved for use with child safety seats that meet the

requirements for weight classes 9 to 18 kg and 15 to 36 kg, please refer to the operating

instructions of your vehicle.

The

EVOLVA 1-2-3 SL SICT

Group

1 (9-18 kg)

Vehicle belt + soft latch

2+3 (15-36 kg)

Vehicle belt + soft latch

This means that the child safety seat may only be used in vehicles that are listed in the enclosed

vehicle type list. This type list is consistently kept up to date.

The latest version can be obtained from us or from www.britax.com

You can use your child safety seat as follows:

In the direction of travel

Against the direction of travel

With 2-point harness

With 3-point belt

with ISOFIX fastening points (be-

tween seat surface and backrest)

On front passenger seat

On outer rear seat

On centre rear seat

(with 3-point belt)

1) Use on a rearward-facing vehicle seat (e.g. in a van or minibus) is only permitted if the vehicle

seat is also approved for use by adults. The seat may not be in the area of e ect of an airbag.

2) The safety belt must be approved to ECE R 16 or a comparable standard, e.g. see whether

there is an "E" or "e" in a circle on the belt test label.

3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions

in the vehicle owner's manual.

4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.

9 to 36 kg

(~9 months to

12 years of age)

EVOLVA 1-2-3 SL SICT

User instructions

(see 5.1).

in warm water containing washing-up

thoroughly and dry it.

on end and push it downwards

in the cover and through the

90° and hook the adjusting strap

(5.8).

to make

into the belt slot and use the

Container for cardboard boxes

Residual waste, waste incineration

To be placed in the corresponding

container according to labelling

Container for metals

Container for polyester

www.britax.com

Residual waste

is approved for two di erent methods of installation:

Installation method

Means by which child

Section of

is secured

user instructions

Vehicle belt

With 5-point harness

Vehicle belt

Yes

9-36 kg

Yes