CEP HT63 E Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CEP HT63 E. CEP HT63 E 20 pagina's.

Power consumption

The following table shows you the power consumption of the HT63 E / in different modes.

Safety and Product Care

Please read the information in this section and the information in "Installation of the

Modem", before starting your integration work!

PLEASE READ THESE SAFETY INSTRUCTIONS AND KEEP A COPY OF THEM.

 Always ensure that use of the modem is permitted. The modem may present a hazard if used in

proximity to personal medical electronic devices. As a rule, the modem must not be used in

hospitals, airports or planes.

 Never use the modem at a gas station, refuelling point, blasting area or in any other environment

where explosives may be present.

 Operating the modem close to other electronic devices, such as antennas, television sets, and

radios may cause electromagnetic interference.

 This product is intended to be used with the antenna or other radiating element at least 20cm away

from any part of the human body. In applications where this rule cannot be applied, the

application designer is responsible for providing the SAR measurement test report and

declaration.

 You are responsible for observing your country's safety standards, and where applicable, the

relevant wiring rules.

The HT63-E Terminal as a stand alone item is designed for indoor use only. To use outside it

must be integrated into a weatherproof enclosure. Do not exceed the environmental and

electrical limits as specified in "Technical Data".

 Avoid exposing the modem to lighted cigarettes, naked flames or to extreme hot or cold

temperature.

 Never try to dismantle the modem yourself. There are no components inside the modem that can

be serviced by the user. If you attempt to dismantle the modem, you may invalidate the warranty.

HT63-E Standby mode

HT63-E low power mode

Table 7: Power consumption in idle and low power mode

[mA] @ 12V

~ 22

< 2