HIKVISION TURBO HD DS-2CE56H0T-VPIT3ZE Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION TURBO HD DS-2CE56H0T-VPIT3ZE. HIKVISION TURBO HD DS-2CE56H0T-VPIT3ZE 17 pagina's.
Pagina afdrukken
1.2.3 Overview of Type III Camera
Video Cable
Power Cord
12 VDC
Figure 1-3 Overview of Type III Camera
2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is
power-off during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
If the wall is cement, you need to insert expansion
bolts before you install the camera. If the wall is
wooden, you can use self-tapping screws to secure
the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance
by yourself.
2.1 Installation of Type I and Type II Camera
2.1.1 Ceiling Mounting
Before you start:
Both wall mounting and ceiling mounting are suitable
for the dome camera. Ceiling mounting will be taken as
an example in this section. You can take steps of ceiling
mounting as a reference for wall mounting.
Steps:
1. Paste the drill template to the celling.
2. Drill screw holes and the cable hole (optional) on
the ceiling according to the supplied drill template.
Type I Camera
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
Figure 2-1 The Drill Template
Bubble
Lens
Back Box
Type II Camera