Ganz YCH-03Am Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ganz YCH-03Am. Ganz YCH-03Am 8 pagina's. Color/ digital day & night camera mechanical day & night camera
Pagina afdrukken
When using "AUTO" of the MIST mode, be
sure to switch the mode from "AUTO" to
"STD" and then back to "AUTO" after setting
up the camera. This is required to reset the
data accumulated during the setup process.
When using "AUTO" of the MIST mode, fi x
the camera setting direction. The "AUTO"
cannot be used for constant movement of
all objects, such as when a pan-tilt camera
is used. In such a case, use "STD" of the
MIST mode.
5 MIST/DRC level selection switch
HI :
MIST level (when the MIST mode is
set to "STD" in 4 )
Allows wider operating range as
well as achieving higher correction
effects than "STD" mode.
DRC level (when the MIST mode is
set to "AUTO" in 4 )
Achieves higher correction effects
than "STD" mode.
STD:
Sets standard correction effects for
MIST and DRC.
The following shows the switch settings and
the MIST/DRC function settings.
Mode setting switch
YCH-03Am
BLC
FLC
DDN
MIST
AUTO
LEVEL
BLC
FLC
ON
ON
AUTO
HI
OFF
OFF
OFF
OFF
STD
STD
1
2
3
4
5
6
Factory default switch settings
Position settings of MIST-related switches
MIST
DRC
OFF/STD/AUTO
OFF/STD/HIGH
OFF
OFF
STD
HIGH
STD
AUTO
HIGH
ZC-NH258Nm
BLC
FLC
WB
MIST
AUTO
LEVEL
BLC
FLC
AWB
ON
AUTO
HI
OFF
OFF
ATW
OFF
STD
STD
1
2
3
4
5
6
SW No.
4
5
MIST
AUTO/STD
LEVEL
ON/OFF
mode
HIGH/STD
6 D D/N (Digital Day & Night) select switch
(YCH-03Am)
The camera image digital processing
produces well-lit images even in low
illumination environments. While this function
is operating, the image will be monochrome.
When the environment in which the camera
is being used brightens the image will be in
color.
ON : Day/Night automatic switching (low
illumination: monochrome; normal
lighting: color)
OFF : Fixed to color image
7 FLC switch
FLC : Shutter speed to be fi xed at 1/100
sec.
OFF : Normal position
(Fixed at 1/60 second)
8 BLC (Back Light
Compensation) mode
switch
When strong light (sun, sky, illumination,
etc.) is present behind the object being
photographed, the object will appear dark. In
this case, put this switch in the BLC position.
9 WB (White Balance) switch (ZC-
NH258Nm)
AWB : Will set fi xed white balance.
ATW : The white balance will be
automatically adjusted following any
changes in the color temperature of
a light source.
bk Auto-iris output connector
For connecting the cable of an
auto-iris lens. The pin assignment
is following.
No.
DC
1
CONTROL -
6
2
CONTROL +
3
DRIVE +
4
DRIVE -
bl Flange back lock screw
Loosen this screw for fl ange back adjustment.
Be sure to retighten the screw after
adjustment.
bm Auto-Iris mode switch
For switching the output from the auto-iris
connector ( bk ).
EG-5
VIDEO
+ 12V (max. 50 mA)
N. C.
VIDEO
GND