Ganz LED-19 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ganz LED-19. Ganz LED-19 20 pagina's.

Disassembling the monitor

1. Put a smooth pad or cloth on a level surface.

Place the monitor on it facing downwards.

2. Detach the rear cover of the monitor stand with

a screw driver.

3. Remove the two screws connecting the stand

and monitor body.

1. Put a smooth pad or cloth on a level surface.

Place the monitor on it facing downwards.

2. Join the stand with the metal protrusion from

the bottom of the monitor's main body.

3. Tighten the screw fully at the bottom of the

stand by turning it clockwise three to four turns.

4. After fully tightening the screw, bend the knob

of the screw onto the bottom of the stand.

Caution : Incomplete tightening of the screw may

cause the monitor unstable.

Disassembling the monitor

1. Put a smooth pad or cloth on a level surface.

Place the monitor on it facing downwards.

2. Remove the four screws connecting the stand

rear body.

3. Remove the connecting stand front body.

Screw(x2)

(17",19"W,19",22",24")

(27")

1. AC IN(17",19"W,19",22",24")

DC 12V Input (27")

2. CAM OUT

Composite signal output

3. CAM IN

Composite signal input.

4. HDMI

HDMI signal input.

5. VGA

RGB signal input.

(17")

(27")