Avantco 177MX40H Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avantco 177MX40H. Avantco 177MX40H 9 pagina's. Planetary floor mixer

Pagina afdrukken

Cleaning & Maintenance

WARNING

DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE CLEANING

•

All new mixer bowls and accessories, including whips, beaters, and dough hooks, should be properly

washed before use.

•

If the unit has not been used for some time, it is recommended that the procedure above is followed

before mixer use.

•

It is important that the rear bowl lift guides are greased every three months to prevent corrosion.

•

The bowl guard is easily removable for cleaning. (See Safety Guard Removal on page 8.)

•

It is highly recommended this cleaning procedure is followed for bowls and accessories prior to

whipping egg whites or whole eggs.

Cleaning

Clean the bowl and accessories with hot water and mild soap.

2. Rinse with a mild vinegar or soda solution.

3. Rinse with clean water and allow to dry.

4. Clean the outside of the unit with a clean, damp cloth.

Troubleshooting

Problem

Unit unplugged.

Nothing happens when

Improper voltage.

unit is turned ON.

Safety guard, bowl, or bowl lift

handle are out of position.

Oil leaking from unit.

Sealing washer is damaged.

Insufficient voltage.

Motor overheating

and running slower

Incorrect speed selected.

than it should.

Unit is noisy and

Poor lubrication.

overheating.

Mixer accessory is

The mixing accessory or bowl

touching bowl during

may be deformed.

operation.

The motor is close to

Mixing stops before

overheating and the thermal

timer is up.

overload switch has been

activated.

User Manual

Possible Cause

Ensure the plug is securely set in the outlet.

Check that the outlet matches the units power requirements.

Ensure all parts are securely placed in position according to

operation instructions before hitting ON switch.

Replace the washer.

Check that the outlet matches the units power requirements.

Select a lower speed as the product you are mixing may be too

dense for higher speeds. (See Mixer Capacity Chart on Page 6.)

Add or change lubrication.

Repair or replace the deformed piece.

Allow unit to cool down for 30-60 minutes, reduce batch size if

problem persists.

60 Qt. Planetary Floor Mixer

Solution