Avantco 177PPC22 Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avantco 177PPC22. Avantco 177PPC22 9 pagina's. Potato peelers
Pagina afdrukken
Installation
Unpacking
•
Remove all the packing material and protection film (if applicable). Keep the packaging for future storage.
•
Make sure that all components are intact. Keep the carton for any future machine removal.
•
Lift the machine according to the instructions and place it in its selected setting for installation.
•
Clean the appliance before first use, see: Cleaning Section
Installation Area
•
The selected machine work setting must be sufficiently lit and have an electric power outlet.
•
Place the appliance on a level and steady surface, unless mentioned otherwise.
•
Make sure there is enough clearance around the appliance for ventilation purposes.
•
Position the appliance in such a way that the plug is always accessible.
Electrical Connection
CAUTION: Electric connection to the power outlet should be operated by skilled personnel.
Check for the perfect efficiency of the plant grounding system. Make sure that the line voltage (V) and frequency (Hz)
correspond to the machine ratings (refer to the machine identification plate and wiring diagram).
Water and Discharge Connection
•
Connect to water supply by means of the supplied hose (59 in) and 3/4 " couplings. Proceed as follows:
•
Connect hose to inlet at the back side of the machine. (A on diagram 1 below)
•
Connect the other end of the hose to water supply. (B on diagram 1 below)
•
For the floor models, use the hose clamp to affix the drain hose to the joint of the discharge pan. The other end of
the drain hose is inserted into the drainage system. (see diagram 2 below)
Note: The drain hose and hose clamps are optional parts.
1
www.AvantcoEquipment.com
User Manual
2
5