IKEA DISKAD Gebruiksaanwijzing - Pagina 30
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} IKEA DISKAD. IKEA DISKAD 50 pagina's.
Ook voor IKEA DISKAD: Handmatig (36 pagina's), Handmatig (16 pagina's), Handmatig (45 pagina's), Handmatig (37 pagina's)
Pagina afdrukken
en Operating the appliance
Time preselection *
* depending on the configuration of
T i m e p r e s e l e c t i o n
your specific dishwasher
You can delay the start of the
programme in hourly steps by up to 24
hours.
Here's how to set up the delay:
Switch on ON/OFF switch (.
1.
Press the timer programming button
2.
P + repeatedly until h
appears in the display window.
Keep pressing the timer
3.
programming button P - or + until
the desired time is displayed.
Press START button `.
4.
The delay timer has been activated.
To clear the specified delay, press
5.
the button P - or + repeatedly until
appears in the display
h
window.
Until the programme has started, you
can change your selection in any way
you like.
30
Programme end
The programme has finished when the
value :
appears in the display
window h. If a value has been set for
the signal volume, then the end of the
programme is also indicated by a
buzzer.
Here's how to change the signal
volume:
Switch on ON/OFF switch (.
1.
Hold down the programme button
2.
# and then repeatedly press the
START button ` until : ...
appears in the display window.
Release both buttons.
3.
The LED of the # button flashes
and the digital display h shows
the factory setting :
Press the programme button #
4.
repeatedly until the factory setting
value :
appears in the display
window h.
Press the programme button 3.
5.
Each time the button is pressed the
set value increases by one level;
when it reaches the value :
display jumps back to :
Press START button `.
6.
The set value is saved.
* depending on the features of your
dishwasher
.
the
(off).